Pioneer VSX-516-S/-K Operating Instructions Manual page 22

05 Controls and displays
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal
assigned for the current component:
AUTO
Lights when AUTO signal select is on.
SB (VSX-516 model only)
Depending on the source, this lights when
a signal with surround back channel
encoding is detected.
DIGITAL
Lights when a digital audio signal is detected.
DTS
Lights when a source with DTS encoded
audio signals is detected.
2 DIGITAL
Lights when a Dolby Digital encoded
signal is detected.
ANALOG
Lights when an analog signal is detected.
2
Lights to indicate decoding of a DTS
multichannel signal.
3 2 DIGITAL
Lights to indicate decoding of a Dolby Digital
multichannel signal.
4 2 PRO LOGIC II x (VSX-516 model) /
2 PRO LOGIC II (VSX-416 model)
2 PRO LOGIC II lights to indicate Pro Logic II
decoding. 2 PRO LOGIC IIx lights to indicate
Pro Logic IIx decoding (see Listening in
surround sound on page 28 for more on this).
5 VIR.SB
Lights during Virtual surround back
processing (page 32).
6 DIRECT
Lights when source direct playback is in use.
Direct playback bypasses the tone controls for
the most accurate reproduction of a source.
7 AUTO SURR.
Lights when the Auto Surround feature is
switched on (see Auto playback on page 28).
22
En
8 ATT
Lights when ANALOG ATT is used to attenuate
(reduce) the level of the analog input signal.
9 SLEEP
Lights when the receiver is in sleep mode.
10 Tuner indicators
/ MONO
Lights when the mono mode is set using
the MPX button.
/ STEREO
Lights when a stereo FM broadcast is being
received in auto stereo mode.
/ TUNED
Lights when a broadcast is being received.
11 Speaker indicator
Shows if the speaker system is on or not.
SP A means the speakers are switched on.
SP
means the headphones are connected.
12 Sound Retriever indicators
(VSX-516 model only)
Light when the Sound Retriever is switched on
(page 33).
13 Character display
14 Neo:6 (VSX-516 model only)
Lights to indicate Neo:6 processing.
15 ADV.SURR (Advanced Surround)
Lights when one of the Advanced Surround
modes has been selected.
16 WMA9 Pro
Lights to indicate decoding of a WMA9 Pro
signal.
17 MIDNIGHT
Lights during Midnight listening (page 33).
18 D.E.
Lights when Dialog Enhancement (DIALOG E)
is switched on (page 33).
19 LOUDNESS
Lights during Loudness listening (page 33).
20 EX (VSX-516 model only)
Lights when a Dolby Digital Surround EX
encoded signal is detected.