Connecting Speakers - Pioneer VSX-409RDS Operating Instructions Manual

Connecting Speakers

Connect your speakers as shown below. Be sure to connect each speaker to the appropriate speaker terminals,
and also to connect the positive and negative terminals correctly (positive to positive, negative to negative).
When connecting equipment, always make sure the power switched off and the power cord is disconnected
from the wall outlet.
• Use speakers with a nominal impedance of 8
When connecting equipment, always make sure the power switched off and the power cord is disconnected
from the wall outlet.
Front
(left)
R L
AM LOOP
ANTENNA IN CD
O
U
T
VCR/
DVR
IN IN
FM ANTENNA
TV/
IN IN
SAT
DVD
FM
IN /LD IN
UNBAL
75 FRONT
R
OUT
E R
C
CD-R
/TAPE
/MD
P
L
IN
A
Y
SUB
WOOFER
Speaker terminals
Use good quality speaker wire to connect the speakers to the
receiver.
1 Twist around 10 mm of bare wire strands together.
2 Unclip the speaker terminal and insert the wire.
3 Snap shut the speaker terminal to secure.
Powered
sub-woofer
INPUT
CONTROL
OUT
OUT
TO
MONITOR
TV
SUB
WOOFER
PREOUT
SURROUND
L
CENTER
DVD 5.1 CH
INPUT
Surround
(left)
Connecting Your System
to 16 .
Center
R L R L
FRONT CENTER SURROUND
SPEAKERS SPEAKER SPEAKERS
Front
(right)
Surround
(right)
ª
·
11