Making A Recording; Making An Audio Recording - Pioneer VSX-409RDS Operating Instructions Manual

Making a Recording

Making an Audio Recording

The following steps show you how to make an audio recording from the built in tuner, or from an audio source
connected to the receiver (such as a CD player or MD player). Recordings can be made to a CD-Recorder,
cassette deck or MD deck connected to the CD-R/TAPE/MD in/out connectors.
The receiver's volume, channel levels, tone (bass, treble), S.bass, and surround effects (Dolby
memo
Pro Logic and DSP settings) have no effect on the recorded signal.
SOURCE SELECT
SOURCE
DVD
TV CONT. TAPE
$ $
1 2
TV FUNC.
@ *
5 6
TV VOL.
EFFECT
9 0
D. ACCESS
TOP MENU
FQ
RF ATT
ENTER
TEST
TONE
FQ
2
SORROUND DSP MODE
CH. SELECT LEVEL
RECEIVER FUNCTION
DIMMER
1
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
1
32
1 Press the FUNCTION button to select a
source to record.
All functions except MONITOR are accessible from the remote
CD TUNER
control.
MD CD-R On the receiver, select the source directly using the front panel
buttons.
! !
3 4
& #
7 8
2 Prepare the programme source.
CHANNEL
STATION
Tune to the radio station, load the CD, etc.
CLASS
MENU
DISP
3 Insert a blank CD-R, MD, tape etc. into the
MPX
SET UP
recording device connected to either CD-R/
MUTING
TAPE/MD and set the recording levels.
Refer to the instructions that came with the recorder if you are
FL MASTER
VOLUME
unsure how to do this.
Î
4 Start recording, then start playback of the
source component.
MONITOR
Record MONITOR
You can listen to (monitor) the recording as it's being made using the
MONITOR button on the Front Panel (a cassette deck would have to
have a record monitor function).
Press the MONITOR button to switch between the recorded signal and
the original source signal.