About Status Messages; Xm Radio Messages - Pioneer Elite SC-07 Operating Instructions Manual

Pioneer audio/video multi-channel receiver operating instructions
Hide thumbs Also See for Elite SC-07:
Table of Contents

Advertisement

Additional information
Symptoms
Causes
The Home Media Gallery
The remote control is not currently set to the
cannot be operated with
Home Media Gallery mode.
the buttons on the remote
control.

About status messages

Refer to the following information when you come up with a status message while operating the Home Media Gallery.
Status messages
Please Wait
Connection Down
File Format Error
Track Not Found
Server Error
Server Disconnected
USB Error 1
empty
Preset Not Stored
Network Problem
Out of Range
License Error
Item Already Exists
Favorite List Full

XM radio messages

Symptom
Cause
Check XM Tuner
The XM Mini-Tuner is not installed or not fully seated
in the XM Mini-Tuner Dock or the XM Mini-Tuner
dock is not connected to this receiver.
Check Antenna
The XM antenna is not connected to the XM Mini-
Tuner Dock or the XM antenna cable is damaged.
Loading
The XM Mini-Tuner is acquiring audio or program
information from the XM satellite signal. This
message can also occur in weak XM signal
conditions.
Note that this receiver may not respond to some
buttons while this message is displayed.
No Signal
The XM Mini-Tuner is not receiving the XM satellite
signal. Something may be blocking the XM
antenna's view of the satellites or the antenna is not
properly aimed.
Off Air
The XM channel you selected is not currently
broadcasting.
Descriptions
A component on the network, including a PC, is currently being connected. Wait for a while.
The selected category or Internet radio station cannot be accessed.
Cannot be played back for some reasons.
The selected song has not been found anywhere on the network.
The selected server cannot be accessed.
The server has been disconnected.
The amount of electricity consumption for a USB memory device is too large.
There are no files stored in the selected folder.
The selected Internet radio station is not currently registered and saved.
There is a problem with the network settings. Check the network settings. The message also
appears then the network settings of this receiver have been changed. In this case, please
wait.
The value entered is beyond the permitted range of the network settings.
The license for the contents to be played back is invalid.
This is displayed when the file you have attempted to register in the Favorites folder has
already been registered.
This is displayed when you have attempted to register a file in the Favorites folder but the
Favorites folder is already full.
Remedies
Press HOME MEDIA GALLERY to set the
remote control to the Home Media Gallery
mode.
Action
Confirm the XM Mini-Tuner is fully seated in the dock
and check the XM Mini-Tuner dock cable is
connected to this receiver.
Check that the XM antenna is securely connected to
the XM Mini-Tuner Dock and check the antenna
cable for damage. Replace the XM antenna if the
cable is damaged.
This message should disappear in a few seconds in
good signal conditions.
If you see this message often, reposition the XM
antenna for better signal reception.
Use the Antenna Aiming option to optimize the
antenna position.
Check for antenna obstructions and reposition the
XM antenna to get better signal reception. Use the
Antenna Aiming option to optimize the antenna
position.
See instructions supplied with the XM Mini-Tuner
and Dock for antenna installation information.
Check back later; in the mean time, select another
channel.
15
Refer to
76
121
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elite sc-05

Table of Contents