Pioneer D2000SPL Owner's Manual page 13

Two Amplifier (Ex. Bridge)
MODE SELECT switch
must be in MASTER position.
MODE SELECT switch
must be in SYNC INV
position. Before setting
to the position, remove
the screw and the stop-
per.
• Only use speakers having an impedance of 2 Ω to 16 Ω. In addition, in the case of connecting multiple
speakers with a bridge, check that the synthetic impedance is at least 2 Ω.
Two Amplifier
MODE SELECT switch must
be in MASTER position.
MODE SELECT switch
must be in SYNC position.
Before setting to the posi-
tion, remove the screw and
the stopper.
• Use speakers having an impedance from 1 Ω to 8 Ω.
SYNC OUTPUT
Connecting wire with
RCA pin plugs (sold
separately).
Connecting
SYNC
speaker wire
INPUT
(sold separately).
SYNC OUTPUT
Connecting wire
with RCA pin plugs
(sold separately).
SYNC
INPUT
Connect to a car stereo.
For details, see the "Connection Diagram".
Connect to a car stereo.
For details, see the "Connection Diagram".
2 Ω to
16 Ω
4 000 W
(2 Ω)
1 Ω to 8 Ω
2 000 W
(1 Ω)
1 Ω to 8 Ω
2 000 W
(1 Ω)
12