Calling; Dialing With Number Keys; End Call; Set Volume - Siemens M56 User Manual

M56 Barracuda long, am english, A31008-H6350-A40-1-4A19 (28. July 2003,
24

Dialing with number keys

The phone must be switched on
(standby mode).
Enter number (always
with area code, if neces-
sary with international
dialing code).
§Clear§ A short press clears
the last digit, a long press
clears the entire phone
number.
Press the Call key. The dis-
played phone number is
dialed.

End call

Press End key briefly. The
call is ended. Press this
key even if the person on
the other end of the line
has hung up first.

Set volume

Use the control key (top)
to start adjusting the vol-
ume (only possible during
conversation).
Set volume and confirm
with §OK§.
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.

Calling

Redial previous numbers

To redial the phone number last
called:
To redial other numbers that were
dialed previously:
Additional information
Save phone number in Address-
book/Phonebook .....................p. 35, p. 39
§Options§ Call lists............................p. 44
§Hold§.................................................p. 26
y menu§ Call menu.........................p. 28
§Forward§
§Speaker.§
Microphone off ..................................p. 28
Voice dialing......................................p. 42
Auto key lock .....................................p. 77
Phone number transmission off/on
(Hide ID)............................................p. 77
International dialing codes...............p. 117
Phone number memo......................p. 119
Control codes (DTMF).....................p. 115
Press Call key twice.
Press the Call key once.
Pick out the required
phone number from the
list, then press ...
... to dial.
Set divert .........................p. 77
Speakerphone ................p. 26