JVC TH-G40C Service Manual page 12

3.1.3 Removing the HDMI board (See Fig. 7, 8)
(1) Remove the one screw C attaching the HDMI board. (See
Fig.7)
(2) Disconnect the card wire from Main board connected to
connector CN810 of the HDMI board. (See Fig.8)
(3) Remove the three screws D attaching the HDMI board.
(See Fig.8)
3.1.4 Removing the DVD mechanism (See Fig.9)
(1) Disconnect the card wires from DVD mechanism connect-
ed to connector P400 and
(2) Remove the four screws E attaching the DVD mechanism.
1-12 (No.MB672<Rev.002>)
P401 of the Main board.
Fig.7
CN810
Fig.8
E
P401 P400
Fig.9
C
D
E