JVC TH-C90A Service Manual page 10

3.1.3 Removing the Audio & Digital input board assembly
(See Fig. 6 to 8)
(1) Disconnect the card wire from Main board connected to
connector CN102 of the Audio & Digital input board assem-
bly. (See Fig. 6)
(2) For TH-C90, remove the one screw E and two screws F at-
taching the Audio & Digital input board assembly. (See Fig.
7)
(3) For TH-C60, remove the one screw G and one screw H at-
taching the Audio & Digital input board assembly. (See Fig.
8)
(4) Disconnect the board to board connector
ed to connection board and then pull and lift up to direction
of the arrow then take out the Audio & Digital input board
assembly. (See Fig. 6)
1-10 (No.MB570)
CN101 connect-
Audio&Digital input board
CN102
CN101
Fig.6
F
E
Fig.7
H
G
Fig.8