JVC TH-C9 Service Manual page 36

3.4.12 Removing the side panel assembly
(See Figs.19 and 20)
(1) From right side of the speaker main body, insert the tip of
the flat-bladed screwdriver or similar tool into the space be-
tween the speaker main body and side panel assembly,
and lift the side panel assembly little by little to remove.
(See Figs.19 and 20.)
Note:
To prevent damaging the side panel assembly and
speaker main body, insert cushioning plates etc. and be-
low the tip of the flat-bladed screwdriver or similar tool.
(2) Take out the side panel assembly from the speaker main
body.
1-36 (No.MB427)
Side panel assembly
Fig.19
Side panel assembly
Speaker main body
Fig.20
Flat-bladed
screwdriver, etc.
Cushioning
plate, etc.