Table of Contents
Advertisement
3.5
Removing the DSP board, audio input board, DVD board and video board
(See Fig.7)
• Prior to performing the following procedure, remove the top
cover, stay bracket and rear panel.
(1) From the top side of the main body, disconnect the DSP
board from the connector
(2) Disconnect the audio input board from the connector
CN421
on the front board.
(3) Disconnect the DVD board from the connector
the front board.
(4) Disconnect the video board from the connector
the front board.
3.6
Removing the S-video board
(See Fig.8)
• Prior to performing the following procedure, remove the top
cover, stay bracket and rear panel.
(1) From the top side of the main body, disconnect the parallel
wire from the connector
(2) Disconnect the S-video board from the connector
on the front board.
1-8 (No.MB502)
CN481
on the front board.
CN431
CN441
CN511
on the S-video board.
CN461
DVD board
Video board
on
on
CN481
DSP
board
CN421
Audio input board
Front board
CN461
Front board
CN431 CN441
Fig.7
S-Video board
CN511
Fig.8
Advertisement
Table of Contents
