Advertisement
0 Connecting/disconnecting a registered
Bluetooth device
Two devices can be connected
simultaneously.
1
Display the <Biuetooth Setup> screen.
(Page 39)
2
3
Select the device you want to connect (G)),
then press [Connection]
(@
).
40
4
Select [ON] (to connect) or [OFF] (to
disconnect) for the target (G)), then display
the <Paired Device List> screen
(@
).
I:
Mobile phone
J-:
Audio device
II:
Device for using Apps
• The status is shown as follows:
- "Connecting": Connection is in progress.
- "Connected": A connection has been
established.
- "Connect Ready": A connection can be
established.
- "Disconnecting": Disconnection is in
progress.
-
"Disconnected": No connection is
established.
5
Connect the selected device.
• When a Bluetooth mobile phone is connected,
the signal strength and battery level are displayed
when the information is acquired from the device.
0
Deleting a registered Bluetooth device
1
Display the <Biuetooth Setup> screen.
(Page 39)
2
3
Select a device to delete (G)}, then press
[Remove]
(@
).
A confirmation message
appears.
Press [Yes].
Advertisement
