Pausing Cd Playback; Using Compression And Bmx; Selecting The Search Method; Searching Every 10 Tracks In The Current Disc - Pioneer DEH-P55BT Operation Manual

Built-in CD Player
# If the display has automatically returned to
the playback display, select SCAN again by press-
ing FUNCTION.
Note
After scanning of a CD is finished, normal play-
back of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of
the CD.
1 Press FUNCTION to select PAUSE.
Press FUNCTION until PAUSE appears in the
display.
2 Push MULTI-CONTROL up to turn pause
on.
Playback of the current track pauses.
# To turn pause off, push MULTI-CONTROL
down.

Using compression and BMX

Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this unit. Each of the functions has a
two-step adjustment. The COMP function bal-
ances the output of louder and softer sounds
at higher volumes. BMX controls sound rever-
berations to give playback a fuller sound. Lis-
ten to each of the effects as you select
through them and use the one that best en-
hances the playback of the track or CD that
you are listening to.
1 Press FUNCTION to select COMP.
Press FUNCTION until COMP appears in the
display.
2 Push MULTI-CONTROL up or down to
select your favorite setting.
Push MULTI-CONTROL up or down repeatedly
to switch between the following settings:
COMP OFF—COMP 1—COMP 2—
COMP OFF—BMX 1—BMX 2

Selecting the search method

You can switch the search method between
fast forward/reverse and searching every 10
tracks.
1 Press FUNCTION to select FF/REV.
Press FUNCTION until FF/REV appears in the
display.
# If the search method ROUGH has been pre-
viously selected, ROUGH will be displayed.
2 Push MULTI-CONTROL left or right to
select the search method.
Push MULTI-CONTROL left or right until the
desired search method appears in the display.
! FF/REV – Fast forward and reverse
! ROUGH – Searching every 10 tracks
Searching every 10 tracks in
the current disc
If a disc contains over 10 tracks, you can
search every 10 tracks. When a disc contains
many tracks, you can roughly search for the
track you want to play.
1 Select the search method ROUGH.
Refer to Selecting the search method on this
page.
Section
06
23
En