Irf Member Id; Mpu Roles; Irf Port - HP FlexFabric 12900 Series Configuration Manual

IRF member ID

An IRF fabric uses member IDs to uniquely identify and manage its members. If two devices have the
same IRF member ID, they cannot form an IRF fabric. If the IRF member ID of a device has been used in
an IRF fabric, the device cannot join the fabric.
Member ID information is included as the first part of interface numbers and file paths to uniquely identify
interfaces and files in an IRF fabric. For example, after you assign a device with member ID 2 to an IRF
fabric, the name of interface FortyGigE 3/0/1 changes to FortyGigE 2/3/0/1. The file path changes
from slot16#flash:/test.cfg to chassis1#slot16#flash:/test.cfg.

MPU roles

Each IRF member device has one or two MPUs. The following are MPU roles:
Role
Master MPU
Active MPU
Standby MPU

IRF port

An IRF port is a logical interface for the connection between IRF member devices. Every IRF-capable
device supports two IRF ports.
In standalone mode, the IRF ports are named IRF-port 1 and IRF-port 2.
In IRF mode, the IRF ports are named IRF-port n/1 and IRF-port n/2, where n is the member ID of the
device. The two IRF ports are referred to as IRF-port 1 and IRF-port 2 in this book.
To use an IRF port, you must bind a minimum of one physical interface to it. The physical interfaces
assigned to an IRF port automatically form an aggregate IRF link. An IRF port goes down only if all its IRF
physical interfaces are down.
For two neighboring devices, their IRF physical links must be bound to IRF-port 1 on one device and to
IRF-port 2 on the other.
Description
Active MPU of the master device. It is also called the global active MPU. You
configure and manage the entire IRF fabric at the CLI of the global active MPU.
Active MPU on each member device. An active MPU performs the following
operations:
•
Manages the local device, including synchronizing configuration with the
local standby MPU, processing protocol packets, and creating and
maintaining route entries.
•
Handles IRF-related events, such as master election and topology collection.
For the master MPU, all other MPUs are standby MPUs, including active MPUs
on subordinate devices.
If a member device has two MPUs, the MPU backing up the local active MPU is
the local standby MPU from the perspective of the member device.
6