Setting The Clock; Using The Room Setup - Pioneer XV-HTD330 Operating Instructions Manual

Getting started
4 Press ENTER again to finish setting up.
Let's Get Started Menu
Setup complete
If you're finished setting up,
choose [Complete],
to start again choose [Back]
Complete
• Use the (cursor right) button to select
BACK then press ENTER if you want to go
back and change the setting you just
made.
• You can also use the
button on the front panel or the function
buttons (DVD/CD, TUNER, etc.) to switch
the system on from standby.
• The system switches on, but there is
nothing displayed on my TV.
Make sure that the TV is set to the correct
video input (not a TV channel). For
example, if you connected this system to
the VIDEO 1 input on your TV, switch your
TV to VIDEO 1.

Setting the clock

Setting the clock allows you to use the timer
features.
1 Press TIMER (SHIFT + 6).
• If you are adjusting the clock, rather then
setting it for the first time, press TIMER
(SHIFT + 6) again.
2
the display, press
right) until you see it.
3
4
buttons to set the hour.
5
6
Back
buttons to set the minute.
7
The display flashes to indicate the clock is set.
OPEN/CLOSE

Using the Room Setup

Before using your DVD system to enjoy
surround sound playback, we recommend
you spend a few minutes using the Room
Setup. This is a quick and easy way to get
good surround sound for your room.
Depending on the distance of the surround
speakers from your main listening position,
choose between S (small), M (medium), or L
(large) room, then depending on your seating
position relative to the front and surround
speakers, choose Fwd (forward), Mid, or
Back.
If CLOCK ADJ isn't already shown in
or
Press ENTER.
Use the (cursor up/down)
Press ENTER.
Use the (cursor up/down)
Press ENTER to confirm.
• Press TIMER (SHIFT + 6) anytime to
display the clock.
• If you unplug the system from the wall
outlet, or there is a power outage, you will
need to set the clock again.
04
(cursor left or
27
En