Pioneer XV-HTD330 Operating Instructions Manual page 24

03 Controls and displays
8 MUTE (page 41)
Press to mute all sound from the speakers
and headphones (press again to cancel).
9 VOLUME
Use to adjust the volume.
10 HOME MENU / SYSTEM SETUP
• Press to display (or exit) the on-screen
menu for Initial Settings, Play Mode
functions, etc.
• Use with SHIFT for SYSTEM SETUP: Use
to make various system and surround
sound settings. (page 61)
11 DVD MENU / TOP MENU
• Press to display a DVD-Video disc menu,
or the Disc Navigator if a VR mode DVD-
RW, CD, Video CD , MP3, WMA or JPEG
disc is loaded.
• Use with SHIFT for TOP MENU: Use to
display the top menu of a DVD disc in the
play position (this may be the same as
pressing DVD MENU).
12 TUNE +/–, ST +/–, cursor control
buttons and ENTER
• Use the TUNE +/– and ST +/– buttons
when listening to the radio to tune into
stations, or select preset stations.
• Use the cursor buttons (
enter to navigate on-screen displays and
menus; ENTER selects an option or
executes a command.
13 SOUND MODE / QUIET/MIDNIGHT
• Use to adjust the tone and effect level.
(pages 38–41)
• Use with SHIFT for QUIET/MIDNIGHT:
Use to select the Quiet and Midnight
modes. (page 40)
14 RETURN
Press to return to a previous menu screen.
24
En
15 Playback controls
Press to start or resume playback.
and
Use for reverse slow motion playback,
frame reverse and reverse scanning.
and
Use for forward slow motion playback,
frame advance and forward scanning.
/ FOLDER –
Press to jump to the beginning of the
current chapter/track, then to previous
chapters/tracks.
Press SHIFT +
beginning of the previous folder
/ FOLDER +
Press to jump to the next chapter/track (or
folder by pressing SHIFT +
Press to pause playback; press again to
restart.
Press to stop playback.
16 Number buttons and SHIFT functions
Use the number buttons for selecting
) and
chapters/tracks from a disc directly; use with
the SHIFT button to access the functions
printed in green.
PROGRAM (SHIFT + 1) (page 47)
Use to program/play a program list.
REPEAT (SHIFT + 2) (page 45)
Use to select a repeat play mode.
RANDOM (SHIFT + 3) (page 46)
Use to select a random play mode.
TEST TONE (SHIFT + 4) (page 62)
Use to output the test tone (for speaker
setup).
to jump to the
).