Buick Enclave Owner's Manual page 226

Hide thumbs Also See for Enclave:
Table of Contents

Advertisement

: Press to turn cruise control on
or off. A white indicator comes on in
the instrument cluster.
RES+ : If there is a set speed in
memory, press the control up briefly
to resume to that speed or press
and hold to accelerate. If cruise
control is already engaged, use to
increase vehicle speed.
SET : Press the control down
briefly to set the speed and activate
cruise control. If cruise control is
already engaged, use to decrease
vehicle speed.
: Press to disengage cruise
control without erasing the set
speed from memory.
The speedometer reading can be
displayed in either English or metric
units. See Instrument Cluster 0 132.
The increment value used depends
on the units displayed.
Setting Cruise Control
If
is on when not in use, SET or
RES+ could get pressed and go into
cruise when not desired. Keep
off when cruise is not being used.
1. Press
to turn the cruise
system on.
2. Get to the speed desired.
3. Press and release SET . The
desired set speed briefly
appears in the instrument
cluster.
4. Take your foot off the
accelerator pedal.
The cruise control indicator on the
instrument cluster turns green after
the cruise control has been set to
the desired speed. See Instrument
Cluster 0 132.
Resuming a Set Speed
If the cruise control is set at a
desired speed and then the brakes
are applied or
is pressed, the
cruise control is disengaged without
erasing the set speed from memory.
Driving and Operating
Once the vehicle reaches about
40 km/h (25 mph) or more, press
RES+ up briefly. The vehicle returns
to the previously set speed.
Increasing Speed While Using
Cruise Control
Do one of the following:
Press and hold RES+ up until
the vehicle accelerates to the
desired speed, then release it.
To increase vehicle speed in
small increments, press RES+
up briefly. For each press, the
vehicle goes about 1.6 km/h
(1 mph) faster.
Reducing Speed While Using
Cruise Control
Do one of the following:
Press and hold SET down until
the desired lower speed is
reached, then release it.
To slow down in small
increments, press SET down
briefly. For each press, the
vehicle goes about 1.6 km/h
(1 mph) slower.
225

Advertisement

Table of Contents
loading

Table of Contents