Buick Enclave Owner's Manual page 151

150 Instruments and Controls
Instantaneous Fuel Economy :
Displays the current fuel economy in
liters per 100 kilometers (L/100 km)
or miles per gallon (mpg). This
number reflects only the
approximate fuel economy that the
vehicle has right now and changes
frequently as driving conditions
change. This display cannot be
reset.
Average Vehicle Speed : Displays
the average vehicle speed of the
vehicle in kilometers per hour (km/h)
or miles per hour (mph). This
average is based on the various
vehicle speeds recorded since the
last reset. Reset the average speed
by pressing when it is displayed.
Fuel Economy : The center
displays the approximate
instantaneous fuel economy as a
number and bar graph. Displayed
above the bar graph is a running
average of fuel economy for the
most recently traveled selected
distance. Displayed below the bar
graph is the best average fuel
economy that has been achieved for
the selected distance. The selected
distance is displayed at the top of
the page as last xxx mi/km.
p
Press to select the distance or
w
reset best value. Use
choose the distance and press
w x
Press and to select Reset
Best Score. Press to reset the
best average fuel economy. After
reset, the best value displays -,-
until the selected distance has been
traveled.
The display provides information on
how current driving behavior affects
the running average and how well
recent driving compares to the best
that has been achieved for the
selected distance.
Economy Trend : Shows history of
the Average Fuel Economy from the
last 50 km (30 mi). Each bar
represents about 5 km (3 mi) of
driving. During driving the bars will
shift to always reflect the most
recent distance on the right side.
Press and hold
or press
the menu.
ECO Index : Provides feedback on
x
and to
the efficiency of current driving
behavior. The bar graph shows a
.
value that is based on current fuel
consumption compared to what is
expected from the vehicle with good
and bad driving habits.
Timer : This display can be used as
a timer. To start the timer, press
while this display is active. The
display will show the amount of time
that has passed since the timer was
last reset. To stop the timer, press
briefly while this display is active
and the timer is running. To reset
the timer to zero, press and hold
while this display is active, or press
p
and select reset.
Speed Limit : Shows sign
information, which comes from a
roadway database in the onboard
navigation, if equipped.
to clear the graph
p
to reset through