Table of Contents
Advertisement
SBX-D201
Procedures
Speaker Bar installation
Install SBX-D201 behind a television set with reference to the figure below.
Two satellite speakers are the same ones.
If it is difficult to install or wire a subwoofer, attach the provided spacer to each end of the
foot at the bottom of the subwoofer. Use two screws per spacer to fasten a spacer to a
subwoofer. Use a Plus screwdriver (JIS No. 1, with the diameter of 5 mm).
The satellite speaker can also be installed upright.
In this case, stick three pieces of the provided adhesive feet for satellite speaker as shown
in the figure.
10
Spacer (provided)
Screws (provided)
Hide quick links:
Advertisement
Table of Contents
