Pioneer SP-SB23W Manual

Pioneer SP-SB23W Manual

Speaker bar system
Hide thumbs Also See for SP-SB23W:

Advertisement

SP-SB23W
REGISTER YOUR PRODUCT AT:
http://www.pioneerelectronics.com (US)
Protect Your New Investment
Improve Product Development
Operating Instructions

Advertisement

Table of Contents
loading

Summary of Contents for Pioneer SP-SB23W

  • Page 1 SP-SB23W REGISTER YOUR PRODUCT AT: http://www.pioneerelectronics.com (US) Protect Your New Investment Improve Product Development Operating Instructions...
  • Page 5 PLEASE TAKE INVENTORY Please check to ensure you have everything in your Pioneer SP-SB23W Speaker Bar System carton. Inside, you should find: SPEAKER BAR POWER CORD (X2) SUBWOOFER 6’...
  • Page 6 OWNER’S MANUAL If anything is missing or damaged, or if your new Pioneer SP-SB23W Speaker Bar System fails to operate, please notify your dealer immediately. We recommend keeping your original carton and packing materials in case you need to ship the unit in the future.
  • Page 7 BAR CONTROLS (Back Panel) 4. 2. 1. Power Connection—The bar power cord SUBWOOFER CONTROLS (Rear Panel) connects here. Subwoofer Power LED 2. SYNC—The SYNC button ensures the subwoofer Red Steady—The subwoofer is plugged and bar are communicating. (See “HOW TO PAIR in/in standby mode.
  • Page 8 CONCERNING THE PLACEMENT OF THIS SYSTEM USING THE RUBBER FEET WITH THE SPEAKER BAR Included in the SP-SB23W Speaker Bar carton are When assembling the system, lay them down flat on (2) feet for the Speaker bar to rest on. Place the their side to avoid accidents or injury.
  • Page 9 finish. Please retain the carton and packing material for your Pioneer products, to protect them in the event of a move or if they need to be shipped to a service center. Product received damaged by a service center...
  • Page 10 TEACHING YOUR SPEAKER BAR TO RESPOND TO ANOTHER REMOTE CONTROL To use your wireless technology device with the SP-SB23W Speaker Bar System, you must Your speaker bar first pair your device with your Speaker Bar. is currently programmed to respond to the remote control that is included with the product.
  • Page 11 HOW TO OPTIMIZE THE SOUND WHEN Use the following steps to adjust the volume balance TV SPEAKERS ARE ON between your TV and the bar: 1. If necessary, program your bar to respond to the You should hear sound from the bar. If you don’t, turn volume up and down control commands of your up the volume on the bar using its volume control but- TV remote.

Table of Contents