To Turn Off Engine; At Very Low Outside Temperatures - Stihl 036 QS Instruction Manual

STOP
0
3
4
When engine begins to fire:
•
Move Master Control lever 
to Q and continue cranking.
•
As soon as engine runs,
LPPHGLDWHO\ blip the throttle trigger
 so that the Master Control lever
 moves to the normal operating
position 
and the engine
returns to idle speed.
As the chain brake is still engaged, the
engine must be returned to idle speed
immediately to avoid damage to the
engine and chain drive (clutch).
 46
5
•
Press down the interlock lever.
•
Immediately pull the hand guard
back toward the front handle: the
chain brake is now disengaged -
your saw is ready for operation.
•
Observe safety precautions.
•
Check chain lubrication before
starting work.
7R WXUQ RII HQJLQH
•
Move Master Control lever to E
Always disengage the chain brake
before opening the throttle. Running the
engine at higher revs with the chain
brake engaged (saw chain at a stand-
still) will quickly damage the engine and
chain drive (clutch, chain brake).
$W YHU\ ORZ RXWVLGH WHPSHUDWXUHV
$OORZ HQJLQH WR ZDUP XS
As soon as the engine runs:
•
Blip the throttle trigger
to disengage it from starting throttle
position -
Master Control lever will move
to normal operating position -
engine settles down to ide speed.
•
Open throttle slightly -
warm up engine for short period.
•
Change over to winter operation
if necessary -
see chapter "Winter Operation".