Adjusting Image Positions (Av Mode Only); Adjusting Image Positions And Clock Automatically (Pc Mode Only); Adjusting Image Positions And Clock Manually (Pc Mode Only) - Pioneer Elite PRO-1120HD Operating Instructions Manual
Plasma display system
Hide thumbs
Also See for Elite PRO-1120HD:
- Correction operating instructions (2 pages) ,
- Operating instructions manual (79 pages)
Table of Contents
Advertisement
Adjustments and Settings
Adjusting image positions
(AV mode only)
Adjust the horizontal and vertical positions of images on the
Plasma Display.
1
Press HOME MENU.
2
Select "Option". ( /
then ENTER)
3
Select "Position". ( /
then ENTER)
4
Select "H/V Position Adjust". ( /
Position
H/V Position Adjust
Reset
5
Adjust the vertical position ( / ) or horizontal position
( / ).
6
Press HOME MENU to exit the menu.
• To restore the factory defaults for all the items, press
"Reset" in step 4, and then press ENTER. A confirmation screen
appears. Press
/
to select "Yes", and then press ENTER.
• Adjustments are stored separately according to input source.
Adjusting image positions and clock
automatically (PC mode only)
Use Auto Setup to automatically adjust positions and clock of
images coming from a personal computer.
1
Press HOME MENU.
2
Select "Option". ( /
then ENTER)
3
Select "Auto Setup". ( /
Option
Auto Setup
Manual Setup
• Auto Setup starts.
4
Press HOME MENU to exit the menu.
then ENTER)
/
to select
then ENTER)
• When Auto Setup is finished, "Auto Setup completed." appears.
• Even when "Auto Setup completed." appears, Auto Setup may have
failed, depending on conditions.
• Auto Setup may fail with a PC image composed of similar patterns or
monochrome. If not successful, change the PC image and try again.
• Be sure to connect the computer to the Media Receiver and switch it
on before starting Auto Setup.
Adjusting image positions and clock
manually (PC mode only)
Usually you can easily adjust the positions and clock of images
using Auto Setup. Use Manual Setup to optimize the positions
and clock of images when necessary.
1
Press HOME MENU.
2
Select "Option". ( /
then ENTER)
3
Select "Manual Setup". ( /
4
Select an item to be adjusted. ( /
Manual Setup
H/V Position Adjust
Clock
Phase
Reset
5
Perform adjustment. ( /
• Use
/
only when you adjust the vertical position
after selecting "H/V Position Adjust".
6
Press HOME MENU to exit the menu.
• To restore the factory defaults for all the items, press
"Reset" in step 4, and then press ENTER. A confirmation screen
appears. Press
/
to select "Yes", and then press ENTER.
then ENTER)
then ENTER)
0
0
and
/ )
/
to select
10
45
En
Hide quick links:
Advertisement
Table of Contents
