Table of Contents
Advertisement
CAUTION!
Make sure that no laundry
becomes trapped between
the seal and the door. There
is a risk of water leakage or
damage to the laundry.
10.2 Setting a programme
Turn the programme selector dial to the
required programme.
The programme dial determines the type
of washing cycle (e.g. water level, drum
movement, number of rinses) and the
washing temperature according to the
type of laundry.
The indicator of Start/Pause button starts
flashing.
The programme dial can be turned
either clockwise or anticlockwise.
Off = Reset programme/switching OFF
of the appliance
If you turn the programme
dial to another programme
when the appliance is
working, the yellow indicator
of Start/Pause button flashes
3 times. The display shows
the message Err to indicate
a wrong selection. The
appliance does not perform
the newly selected
programme.
10.3 Setting the options
Depending on the programme, different
functions can be combined. Not all the
options are compatible. A wrong
selection is indicated by the message
on the display and the Start/Pause
button flashing.
To set an option:
1. Press Options button: all the option
indicators appear on the display.
2. Press the same button to scroll all the
available options. Each option
indicator illuminates on the display
and starts flashing.
3. Press Ok button to activate and
confirm your choice. A black dash
appears under the selected indicator
to show that this option has been set.
4. Press the Options button to
deactivate the option.
5. Once you have set the options, wait
a few seconds until the display gets
back to the default status. The
indicator of the selected option stays
on.
10.4 Starting the programme
Press Start/Pause button to start the
programme. The corresponding red
indicator stops blinking.
The indicator
is on to indicate the
door is locked. To interrupt a
programme which is running, press the
button Start/Pause: the corresponding
red light starts flashing.
To restart the programme from the point
at which it was interrupted, press Start/
Pause button again.
If you have chosen to delay the start, the
appliance will begin the countdown.
If you set an incorrect option, the yellow
indicator of Start/Pause button flashes
for 3 times. The display shows the
message Err for several seconds.
ENGLISH
15
Advertisement
Table of Contents
