Table of Contents
Advertisement
Zapping while Recording
1. With Separated mode in LNB setting menu.
For the tuner being recorded with, all the channels in the same TP can be selected.
For the other tuner, all the scanned channels can be selected.
2. With Loop Through mode in LNB setting menu.
For the tuner being recorded with, all the channels in the same TP can be selected.
For the other tuner, all the channels of the same polarity and the same band as being
recorded channel can be selected.
Repeat mode
The repeat mode works only in playback mode. It does not work in time shifting mode.
There are two repeat modes.
1. Repeating the whole selected service.
a. Start playback a recorded service.
b. Press
button without the progress bar to repeat the whole selected service.
c. Press
button once more to cancel the repeating playback.
2 Repeating the selected region.
a. Start playback a recorded service.
button to display Playback progress bar.
b. Press
c. To specify one end of region, press the
d. Move the cursor by pressing
e. To specify the other end of region, press the
f. Press
button once more to cancel the repeating playback.
button with the progress bar.
(or
) or
(or
) button.
button once more.
58
Advertisement
Table of Contents
