Using The Timer; Setting The Wake-Up Timer - Pioneer S-DV505 Operating Instructions Manual

Using the timer

Setting the wake-up timer

Use the wake-up timer to set the system to
switch on at any time and start playing
whatever source you want.
• The clock must be set to the correct
time for the wake-up timer to work
properly (see page 15).
STANDBY/ON
DVD/CD FM/AM
AUDIO SUBTITLE
AUTO SURROUND
ROOM
BASS MODE
SETUP
VOLUME
SYSTEM SETUP
DVD SETUP
ST–
SOUND
MODE
/e
1
FOLDER –
4 8
PROGRAM REPEAT
1 2
TEST TONE CH LEVEL
4 5
DVD DISP
7 8
INPUT
SHIFT
L1/L2
TV LINE
DVD
ANGLE ZOOM
QUIET/
ADVANCED MIDNIGHT
SYSTEM DISP MUTE
TOP MENU
TUNE +
DVD MENU
ST+
ENTER
RETURN
TUNE –
E/
3 ¡
FOLDER +
7 ¢
RANDOM
3
CLEAR
TIMER
6
ENTER
DIMMER
9 0
TV CONTROL
CHANNEL VOLUME
1 Select the source you want played.
For example, press FM/AM (TUNER on the
front panel) to select the radio as your
source.
2 Prepare the source.
For example, tune in the radio station you
want to wake up to.
If you've selected a CD, make sure that it's
stopped.
3 Set the volume.
4 Press TIMER (SHIFT+6).
5 Use the buttons to select WAKE-
/
UP then press ENTER.
6 Use the buttons to select TIMER
/
EDIT then press ENTER.
7 Set the switch-on time.
Use the buttons to set the hour, then
/
press ENTER. Set the minute in the same
way, pressing ENTER when you're done.
8 Set the switch-off time.
Use the buttons to set the hour, then
/
press ENTER. Set the minute in the same
way, pressing ENTER when you're done.
After pressing ENTER this last time, the
wake-up indicator lights, and the switch-on
and switch-off times are confirmed in the
display.
9 Switch the system into standby mode.
The wake-up timer will not work if the system
is left on!
09
49
En