Listening To A Stereo Source - Pioneer S-DV505 Operating Instructions Manual

Playing sources
1 Select the source you want to
playback.
2 Press AUTO.
For multi-channel sources, Dolby/DTS
decoding is selected automatically accord-
ing to the source and AUTO shows in the
display.
Pressing SURROUND repeatedly during
playback of a multi-channel source will cycle
through the following menu:
Stereo
Dolby Digital/DTS
Selecting STEREO downmixes a multi-
channel source to your two-front speakers.
For a two channel source, you can press
SURROUND repeatedly to select between
the three Pro Logic II modes (below).
Auto
Stereo
Pro Logic II
Music
Refer to page 43 for more details about each
mode.
3 Start playback of the component you
selected in step 1.
Auto
Pro Logic
Pro Logic II
Movie
• When playing 96 kHz digital signal disc
formats, you can only use the STEREO
listening mode.
• When the headphones are connected,
you can only use the STEREO listening
mode.

Listening to a stereo source

When AUTO is selected, a stereo source is
detected automatically and plays through the
front speakers only. To listen to a stereo
source with surround sound, see Listening to
multi-channel playback on the previous
page.
STANDBY/ON
DVD/CD FM/AM
AUDIO SUBTITLE
AUTO SURROUND
ROOM
BASS MODE
SETUP
VOLUME
1 Select the stereo source you want to
playback.
2 Press AUTO.
3 Start playback of the component you
selected in step 1.
L1/L2
TV LINE
DVD
ANGLE ZOOM
QUIET/
ADVANCED MIDNIGHT
SYSTEM DISP MUTE
07
45
En