General Mowing Tips; Transportation And Storage; Maintenance - Ryobi RLM36X41H40 Original Instructions Manual

NOTE: The product will not function if the
telescopic handle is not fully extended and
the two latches are not in the correct position.

GENERAL MOWING TIPS

The run time of the battery depends on the
condition, length, and density of the grass.
Adjust the cutting height of the lawn mower to
suit the current condition of the lawn.
RLM36X41H50
Suggested height
adjustment
Grass
conditions
First pass
Very thin / Dry 3
Thin / Dry 4
Medium /
5
Dense
* battery: BPL3650D
RLM36X41H40
Suggested height
Grass adjustment
conditions
First pass
Very thin / Dry 3
Thin / Dry 4
Medium /
5
Dense
* battery: BPL3640D
For best performance, always cut off one-
third or less of the total height of the grass.
When cutting long grass, reduce walking
speed to allow for more effective cutting
and a proper discharge of the clippings.
Do not cut wet grass; it will stick to the
underside of the deck and prevent proper
collection or discharge of grass clippings.
New or thick grass may require a higher
cutting height.
If you wish to collect the grass cuttings for
disposal, remove the mulching plug and fit
the grass catcher making sure the top flap
is properly closed. Empty the grass catcher
regularly; otherwise, the discharge chute
will become blocked with grass cuttings.
4
Coverage
(maximum)
Succeeding
passes
2 600 m 2 *
500 m 2 *
2
400 m *
Coverage
(maximum)
Succeeding
passes
2
2 500 m *
400 m 2 *
300 m 2 *
If you are making a light cut and wish for
the grass cuttings to remain on the lawn,
fit the mulching plug and close the top flap
to cover the discharge opening. It is not
necessary to fit the grass catcher in this
case.
The product is designed to operate and cut
most effectively when moving forwards.
A higher cutting height will extend the run
time of the battery.

TRANSPORTATION AND STORAGE

Stop the product, remove the isolator key
and the battery. Make sure that all moving
parts have come to a complete stop. Allow
the product to cool down before storing or
transporting.
Clean all foreign materials from the product.
Store the product in a cool, dry, and well-
ventilated place that is inaccessible to
children. Keep away from corrosive agents
such as garden chemicals and de-icing
salts. Do not store outdoors.
For transportation in vehicles, remove
isolator key and secure the product against
movement or falling to prevent injury to
persons or damage to the product.
WARNING
Use extreme caution when lifting or tilting the
product for maintenance, cleaning, storage,
or transportation, the blade is sharp, keep
all body parts away from the blade while it
is exposed.

MAINTENANCE

WARNING
Use only original
replacement parts,
attachments. Failure
cause possible injury, contribute to poor
performance, and may void your warranty.
manufacturer's
accessories and
to do so can