Receiver (2) - Pioneer DVR-540H-S Operating Instructions Manual

Connecting up
Connecting to a cable box or
satellite receiver (2)
If many or all the channels you receive by
cable or satellite are scrambled, we
recommend using this setup.
Using the setup on this page you can:
• Record any channel by selecting it on
the cable box/satellite receiver.
Important
• Do not connect this recorder 'through'
your VCR, satellite receiver or cable box.
Always connect each component
directly to your TV or AV amp/receiver.
A/V
IN 1
2
TV
AC IN
DIGITAL CONTROL
OUT
COAXIAL IN COMPONENT
VIDEO OUT
A/V
OUT
3
Cable box/
Satellite receiver
Note
1 • The setup on this page does not allow you to watch one channel and record another.
• The diagram shows standard video connections, but you can alternatively use the S-video or component video
connections if they're available.
1
VHF/UHF
IN
VHF/UHF
IN (RF IN)
Y IN
OUTPUT 1 INPUT 1 / AUTO START REC
R L R L
P
B
OUT
P
R
VHF/UHF
VIDEO AUDIO VIDEO
S-VIDEO S-VIDEO
OUTPUT 2 INPUT 3
VHF/UHF
OUT
1
VHF/UHF
OUT
VHF/UHF
IN
1
Antenna/cable TV
wall outlet
1 Connect RF antenna cables as shown.
This enables you to watch and record TV
channels.
2 Connect the AUDIO and VIDEO
OUTPUT jacks (1 or 2) on this recorder to
a set of audio/video inputs on your TV
using a set of A/V cables (as supplied).
This enables you to watch discs.
3 Connect the audio/video output of
your cable box/satellite receiver to the
INPUT 1 jacks on this recorder using a set
of A/V cables.
This enables you to record scrambled TV
channels.
1
02
21
En