3.
Insert the bottom edge of the DIMM into the socket.
4.
When the DIMM is inserted, push down on the top edge of the DIMM until
the retaining slips snap into place. Make sure the clips are firmly in place.
5
Installing an AGP Card
CAUTION
Care must be taken when installing an AGP or ADD card into an
AGP slot.
When installing any AGP or ADD card in the desktop board, ensure that it
is fully seated in the AGP connector before you power on the system. If
the card is not fully seated in the AGP connector, an electrical short may
result across the AGP slot pins. Depending on the over-current protection
of the power supply, certain board components and/or traces may be
damaged.
NOTE
Desktop Boards D845GERG2 and D845GEBV2 are only compatible with
1.5 V AGP cards.
.
Intel Desktop Boards D845GERG2 and D845GEBV2
Quick Reference
DIMM 0
DIMM 1
OM14774
9