Attaching The Speaker Pads - Sony MHC-GN100D Operating Instructions Manual

Inserting two R6 (size AA)
batteries into the remote
Operating a Sony TV
You can use the following buttons to operate a
Sony TV.
To
Turn the TV on or off
Switch the TV's input
source between the TV
and other input sources
Change the TV channels
Adjust the volume of the
TV speaker(s)
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Tip
With normal use, the batteries should last for about six
months. When the remote no longer operates the
system, replace both batteries with new ones.
Press
?/1
TV
TV/VIDEO
TV CH +/–
TV VOL +/–

Attaching the speaker pads

Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and to
prevent them from slipping.
When carrying the unit
Do the following procedure to protect the disc
mechanism.
Use buttons on the unit for the operation.
1
Press ?/1 to turn on the system.
2
Press DVD.
3
Make sure that all discs are removed
from the unit.
4
Hold down DVD and then press ?/1 until
"LOCK" appears in the display.
5
Release ?/1 first, then release DVD.
6
Unplug the AC power cord.
11 GB