Troubleshooting - Zte WP832 User Manual

—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

Troubleshooting

If ZTE WP832 appears following phenomenon in the process of application, please
read following relative information at first. If the problems still can not be solved,
please contact with the distributor or service provider.
Problem
No Dial Tone when off-hook.
No corresponding response from
the interface of keypad system
(After several attempts).
Incorrect display of system time.
No display on screen when
disconnect external power
supply.
Press CALL/REDIAL key, but no
number is sent.
There is incoming call, but no
prompt ring tone is heard.
There is no prompt tone when the
alarm clock has reached the time.
Certain call cannot be received.
Cannot send short message.
Check Point
Hook on and hook off receiver again.
Power off and then power on again.
Check whether the system signal is too weak.
Check whether the battery has electricity, or it
is damaged; or power on the phone again.
Check whether you have hooked off (Notice:
Be sure to hook off before sending the
number when making a call.)
Please check the mute mode and the volume
of ring tone.
Please check whether the alarm clock is
enabled or not.
Check whether the number is restricted in
incoming list.
Please check the network condition.
13