Speed Dial List; Pin Code And Puk Code; Text Input - Zte WP832 User Manual

Select Voice Mail to read the messages and dial voice mail number to listen to the
voice message following guide prompt.
Select Preformatted Messages to send the Preformatted Messages.
Select Message Settings to make necessary message settings.
Select Send To Multi to edit and send one message to the multi receiver.

Speed Dial List

In standby state, you can make a Speed Dial of stored number by keying in digit (2-9).
1. Select Menu → Contacts → Find/View All to search for the record you want to
set as speed dial number, press MENU/SELECT key.
2. Move to number in window, press MENU/SELECT key.
3. Scroll to select Add to Speed Dial.
4. Select a slot in list, press MENU/SELECT key.

PIN code and PUK code

PIN Code is used to encrypt the security settings menu. Input right PIN code to
enter security settings menu.
For "without UIM card" phone model, the default PIN code is 0000.Three
consecutive inputting wrong PIN code can cause restarting of phone.
★ For "with UIM card" phone model, three consecutive inputting wrong PIN
" "
code can cause locking of UIM card. To unblock, you need PUK. PIN code and
PUK code may be offered together with the UIM card. If not, contact with
network operator.

Text Input

Operation
Input Letters Multitap Input—"ABC" or "abc", press the corresponding
letter/digit key till the letter appears. Press * key to switch
between capitalization and lowercase. Press * key twice to
enter capitalization case, perss * key again to get back to
lowercase.
Method
6