Using The Timer; Setting The Wake-Up Timer - Pioneer S-DV303 Operating Instructions Manual

Using the timer

Setting the wake-up timer

Use the wake-up timer to set the system to
switch on at any time and start playing
whatever source you want.
• The clock must be set to the correct
time for the wake-up timer to work
properly (see page 15).
1 Select the source you want played.
For example, press FM/AM (TUNER on the
front panel) to select the radio as your
source.
2 Prepare the source.
For example, tune in the radio station you
want to wake up to.
If you've selected a CD, make sure that it's
stopped.
3 Set the volume.
4 Press TIMER (SHIFT+6).
5 Use the buttons to select WAKE-
UP then press ENTER.
6 Use the buttons to select TIMER
EDIT then press ENTER.
7 Set the switch-on time.
Use the buttons to set the hour, then
press ENTER. Set the minute in the same
way, pressing ENTER when you're done.
8 Set the switch-off time.
Use the buttons to set the hour, then
press ENTER. Set the minute in the same
way, pressing ENTER when you're done.
After pressing ENTER this last time, the
wake-up indicator lights, and the switch-on
and switch-off times are confirmed in the
display.
9 Switch the system into standby mode.
The wake-up timer will not work if the system
is left on!
09
49
En