Using The On-Screen Displays; Playing Discs - Pioneer S-DV303 Operating Instructions Manual

Getting started

Using the on-screen displays

For ease of use, this player makes extensive
use of graphical on-screen displays (OSDs).
You should get used to the way these work as
you'll need to use them when setting up the
player, using some of the playback features,
such as program play, and when making
more advanced settings for audio and video.
All the screens are navigated in basically the
same way, using the cursor buttons to
change the highlighted item and pressing
ENTER to select it.
Button What it does
DVD SETUP Displays/exits the on-screen
display
Changes the highlighted
menu item
ENTER
Selects the highlighted menu
item (both ENTER buttons
work in exactly the same way)
RETURN Returns to the main menu
without saving changes
• Throughout this manual, 'Select' means
use the cursor buttons to highlight an
item on-screen, then press ENTER.
• The button guide at the bottom of every
OSD screen shows you which buttons
you'll need to use for that screen.

Playing discs

The basic playback controls for playing DVD,
CD, Video CD and MP3 discs are covered
here. Further functions are detailed in the
next chapter.
1 If the player isn't already on, press
STANDBY/ON to switch it on.
If you're playing a DVD or Video CD, also turn
on your TV and make sure that it is set to the
correct video input.
Press 0 OPEN/CLOSE to open the disc
2
tray.
3 Load a disc.
Load a disc with the label side facing up,
using the disc tray guide to align the disc (if
you're loading a double-sided DVD disc, load
it with the side you want to play face down).
03
17
En