7. Locate the Pulse Wires (28) inside the left and
right sides of the Handlebar (39) and pull them
upward out of the Upright (2).
While a second person holds the Console (4)
near the Upright (2), connect the console wires
to the Wire Harness (42) and to the Pulse Wires
(28).
Insert the excess wires into the Upright (2).
Tip: Avoid pinching the wires. Attach the
Console (4) to the Upright (2) with four M4 x
16mm Screws (92).
8. Attach the Console Cover (32) to the back of
the Console (4) with two M4 x 48mm Screws
(89).
7
4
28
8
4
9
Console Wires
42
2
92
92
39
Avoid
pinching
the wires
32
89