Recording Settings - Pioneer DVR-320-S Operating Instructions Manual

The Initial Setup menu
12
DVD Menu Language
• Default setting: w/Subtitle Language
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Some multilingual discs have disc menus in several
languages. This setting specifies in which language the
disc menus should appear. Leave on the default setting
for menus to appear in the same language as your
Subtitle Language—see Subtitle Language on page 81.
Choose Other if you want to specify a language other
than those listed (see Selecting 'Other' languages on
page 82).
Subtitle Display
• Default setting: On
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
When set to On, the recorder displays subtitles
according to the Subtitle Language and Auto
Language settings. Set to Off to switch subtitles off
altogether (although you may find that some discs
override this setting). Set to Assist Subtitle to have the
recorder display the extra assistive subtitles recorded on
to some DVD discs.
Selecting 'Other' languages
1 Select 'Other' from the language list.
This option appears in the settings for DVD Menu
Language, Audio Language, and Subtitle Language.
2 Select the language you want.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
• Select by language name: Use the
right) buttons to change the language.
82
En
OSD Language
w/Subtitle Language
Audio Language
English
Subtitle Language
French
Auto Language
German
DVD Menu Language
Italian
Subtitle Display Spanish
Chinese
Other
OSD Language On
Audio Language Off
Subtitle Language Assist Subtitle
Auto Language
DVD Menu Language
Subtitle Display
DVD Menu Language
OSD Language
Audio Language
Language
English
Subtitle Language
Auto Language
Number 0 5 1 4
DVD Menu Language DVD Menu Language
Subtitle Display
(cursor left/
• Select by code number: Press
use the number buttons to enter the four-digit
language code.
See Language code list on page 92 for a list of available
languages and corresponding codes.
3 Press ENTER to confirm and exit the screen.

Recording settings

Manual Recording
• Default setting: Off
Initial Setup
Basic Manual Recording
Tuner Optimized Rec
Video In/Out Navi Mark
Audio In Auto Chapter (Video)
Audio Out DVD-RW Auto Init.
Language
Recording
Playback
On the default setting there are four different recording
time/picture quality settings, FINE, SP, LP and EP. If you
want to create a custom setting, switch on Manual
Recording and select one of the 32 manual settings.
When recording, you can select your Manual Recording
setting using the REC MODE button.
1 Select 'On (go to setup)' to display the manual
recording setting screen.
EP LP
MN 9 (4h00m/DVD) 2.60Mbps
2 Use the (cursor left/right) buttons to
change the manual recording level.
• You can also use the
between levels MN1, MN9, MN21 and MN32.
• To preview the recording quality, press
down) and select Preview. To return to the level
adjust screen, press ENTER.
3 Press ENTER to set the manual recording level
and return to the menu screen.
Note
• The preset picture quality settings correspond to the
following manual settings: FINE: MN32, SP: MN21,
LP: MN9, EP: MN1.
• See Language code list on page 92 for detailed
information on the manual recording levels.
(cursor down) then
On (go to setup)
Off
Pr 5
DVD Remain 2h00m
SP FINE
Preview
and buttons to cycle
(cursor