Configuration Procedure - HP 6600 Security Configuration Manual

Hide thumbs Also See for 6600:

Table of Contents

Figure 38 Network diagram

Configuration procedure

The following configuration procedure covers most AAA/RADIUS configuration commands on the Router.

The configuration on the 802.1X client and RADIUS server are not shown. For more information about

AAA/RADIUS configuration commands, see Security Command Reference.

Make sure the 802.1X client can update its IP address after the access port is assigned to the guest

VLAN or a server-assigned VLAN. (Details not shown.)

Configure the RADIUS server to provide authentication, authorization, and accounting services.

Configure user accounts and server-assigned VLAN, VLAN 5 in this example. (Details not shown.)

Create VLANs, and assign ports to the VLANs:

<Router> system-view

[Router] vlan 1

[Router-vlan1] port gigabitethernet 3/0/2

[Router-vlan1] quit

[Router] vlan 10

[Router-vlan10] port gigabitethernet 3/0/1

[Router-vlan10] quit

[Router] vlan 2

[Router-vlan2] port gigabitethernet 3/0/4

[Router-vlan2] quit

[Router] vlan 5

[Router-vlan5] port gigabitethernet 3/0/3

[Router-vlan5] quit