Table of Contents
Advertisement
Section
03
Operating this unit
Switching Auto PI Seek
The unit can automatically search for a differ-
ent station with the same programming, even
during preset recall.
1
Press FUNCTION to select AUTOPI.
2
Press a or b to turn AUTOPI on or off.
Switching the warning tone
If the front panel is not detached from the
head unit within five seconds of turning off the
ignition, a warning tone will sound. You can
turn off the warning tone.
1
Press FUNCTION to select WARN.
2
Press a or b to turn WARN on or off.
Switching the auxiliary setting
Auxiliary equipments connected to this unit
can be activated individually. Set each AUX
source to ON when using. About connecting
or using auxiliary equipments, refer to Using
the AUX source on page 55.
Switching the auxiliary 1 setting
1
Press FUNCTION to select AUX1.
2
Press c or d to select desired setting.
! VIDEO – an iPod with video capabilities
connected with 4-pole mini plug cable (e.g.,
CD-V150M)
! AUDIO – auxiliary equipment connected
with stereo mini plug cable
! OFF – No auxiliary equipment is connected
Switching the auxiliary 2 setting
1
Press FUNCTION to select AUX2.
2
Press a or b to turn AUX2 on or off.
52
En
Setting the AV input
You can connect AV components to the AV
input with an RCA cable.
Switch the AV input setting according to the
connected AV component.
For more details, refer to the installation man-
ual.
! Select TV to watch video of a TV tuner as
TELEVISION source.
! Select DVD to watch video of a connected
DVD player as S-DVD source.
! Select EXT.V to watch video of a connected
video unit as EXT source.
! Select AUX to watch video of an auxiliary
equipment as AUX2 source.
! Select CAMRA to watch a rear view cam-
era video while you are backing your vehi-
cle.
1
Press FUNCTION to select V.IN.
2
Press c or d to select your desired set-
ting.
! OFF – No video component connected
! TV – TV tuner
! EXT.V – External video unit (such as
Pioneer products available in the future)
! DVD – DVD player/multi-DVD player
! AUX – Auxiliary equipment
! CAMRA – Rear view camera
# To watch video of AUX source, set auxiliary 2
setting on. For details, refer to Switching the aux-
iliary setting on this page.
# If AV system display (e.g., AVX-7600) is com-
bined with this unit, connect the rear view cam-
era to the AV system display. For details
concerning connection methods, refer to AV sys-
tem display's instruction manual. Also, V.IN set-
ting of this unit need not be CAMRA.
Advertisement
Table of Contents
