Toshiba SD-K600 Owner's Manual page 21

Hide thumbs Also See for SD-K600:

Owner's manual (51 pages)

Owner's manual (51 pages)

Owner's manual (51 pages)

Table of Contents

Table of

Notes on

Warning

18. Keep your f

7. Do not bloc

manufacturer

so may cause s

Introduction

On handlin

2, 4

• When you are connecting (via the BITSTREAM/PCM (DIGITAL) AUDIO OUT jack) an AV decoder that does not have

Playing in Random Order

Selecting the Camera Angle

DVD disp

Selecting the picture enhancement (E.P.M.*)

Playing Repeatedly

Selecting a Language

About the illustrations of the battery compartment

TOP MENU

Dolby Digital, Digital Theater Systems (DTS) or MPEG2 decoding function, be sure to set "Audio Out Select" to "PCM" from

There are two types of battery compartment in the

PAUSE/STEP

the on-screen displays

SKIP

supplied remote controls. (This does not mean a

SAFETY PRE

You can play titles, chapters within a title, or tracks in random order.

If the scene was recorded from multiple angles, you can easily change

You can play a specific title, chapter, track, or segment repeatedly.

You can easily switch the picture enhancement to your preference.

You can select a preferred language and sound recording system from those

PLAY

• When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog

difference in performance between the two.)

PLAY

(Random playback)

the camera angle of the scene you are watching.

included on the DVD video disc.

(Title repeat, chapter/track repeat, A-B repeat)

IMPORTANT

STOP

stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the ANALOG

Refer to either illustration depending on the actual

's instructions.

Do not touch th

*E.P.M.: Enhanced Picture Mode

Open the cov

remote control.

AUDIO OUT (L/R) jacks of the DVD video player are connected to an amplification system. To enjoy DTS Digital

Precautions ..

Playing in

Locating a

ENTER

Surround™

playback, an external 5.1 channel DTS Digital Surround™

ENTER

19. Do not plac

Notes on Disc

CLEAR

Loading batteries

BITSTREAM/PCM (DIGITAL) AUDIO OUT jack of the DVD video player.

causing serious

Good morning!

Notes on regio

Table of Cont

TOP MENU

Connecting to an audio system and TV equipped with component video inputs

Connecting to an amplifier equipped with an MPEG2 audio decoder

Number buttons

Press SLOW

Press T.

Identification

MPEG2 sound

8. Do not install near any heat sources such as radiators, heat registers, stoves,

Play mode ind

Front panel ....

Playing titles, chapters or tracks in random order

DVD

Selecting the picture enhancement

Repeating a title, chapter, or track

Changing the camera angle

Selecting a playback audio setting

DVD

You can enjoy motion picture and live concert DVD video discs with dynamic

DVD

or other apparatus (including amplifiers) that produce heat.

DVD

Rear panel ......

realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder

Signal flow

or MPEG2 audio processor.

Do not attach pa

DVD display ..

20. Do not use a

To pause playback (still mode)

broken and ma

Remote contro

Press RANDOM.

DVD

Press ANGLE while playing a scene

Press REPEAT.

Press E.P.M.

Press AUDIO during playback.

Press PAUSE/STEP during playback.

Loading batter

recorded with multiple angles.

RANDOM

Each time you press the RANDOM

E.P.M.

SLOW

If you are using an audio CD, skip steps 1 and 2, then

AUDIO

The current audio setting is

The picture enhancement selection

Each time you press the REPEAT

Each time you press the SLOW

Insert batterie

REPEAT

2 3

To resume normal playback, press

PAUSE/STEP

Operating with

at steps 3, enter the number for the track you want

button, the random playback mode

displayed.

appears.

button, the repeat mode changes as

button, the slow-motion speed

ANGLE

Connection

While playing a scene recorded with

the PLAY button.

using the number buttons.

changes as follows.

changes.

follows.

multiple angles, the angle icon ( )

On cleanin

• Sound is muted during still mode.

flashes in the DVD display.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A

e.g.

Connecting to

Press the ANGLE button while the

polarized plug has two blades with one wider than the other. A grounding

To stop playback

angle icon is flashing.

type plug has two blades and a third grounding prong. The wide blade or the

Connecting to

third prong are provided for your safety. If the provided plug does not fit into

Press STOP.

Connecting to

e.g.

your outlet, consult an electrician for replacement of the obsolete outlet.

Fingerprints and

Chapter Repeat

STOP

DVD

Press

to highlight the space of "C

equipped with

Chapter Random

DVD

sound deteriorat

To ANALOG AUDIO OUT

Connecting to

(Chapter)."

outwards with a

Connecting to an amplifier equipped with a digital audio input

Title Repeat

Connecting to

DVD

clean.

Dolby Digital

To remove the disc

Title Random

DVD

Track Repeat

The abbreviation of the language appears instead

2 channel digital stereo

ENTER

Connecting to

Press OPEN/CLOSE.

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an

of the language name. Refer to the list of

DVD

Resuming playback from the same location

Dolby Pro Log

Make sure to m

To audio inputs of

amplifier equipped with a digital audio input and speaker system (right and left front

Remove the disc after the disc tray

languages and their abbreviations.

Track Random

the amplifier

DVD

10. Protect the power cord from being walked on or pinched particularly at plugs,

Connecting to

All Repeat

speakers).

opens completely.

OPEN/CLOSE

convenience receptacles, and the point where they exit from the apparatus.

DTS decoder .

DVD/CD indicator

Enter the number for the chapter or

Press STOP at the location where you

Connecting to

Press ANGLE or

Repeat Off

track you want, using

MPEG2 audio

want to interrupt playback.

If you cannot w

number is displayed on the TV screen.

number buttons.

Connecting to

Random Off

to the marks inside the battery compartment.

STOP

The DVD video player memorizes

the disc lightly w

Select the picture enhancement by

digital audio in

ANGLE

Each time you press the ANGLE

Basic playb

When you use the number buttons, you can use

the location where playback is

finish with a dry

pressing E.P.M. or

button, the camera angle changes.

When you start playback, the elapsed time indicators appear. Pressing the FL SELECT button switches

the +10 button to select numbers from 10 through

stopped.

Close the cover.

Repeating a specific segment

DVD

Do not use any

If you press the RANDOM button

them to the title/chapter/track number indicators. Some discs may not permit this operation.

Press DISPLA

99.

The indicators v

benzine, comme

during playback, the DVD video

Playing a Dis

11. Only use attachments/accessories specified by the manufacturer.

Press PLAY.

Each time you press the button, the picture

spray for vinyl L

DVD video

On storing

e.g. To select chapter or track 25

player automatically starts random

enhancement changes.

You can change the camera angle

Press A-B RPT at the beginning of the

Basic playback

playback after finishing the current

The DVD video player resumes

PLAY

Be sure to press the OPEN/CLOSE button to close

ENTER

directly by pressing the number

Component video (ColorStream

title, chapter or track.

segment (point A) you want to play

Playing in fast

playback from the location where

the disc tray after you remove the disc.

buttons corresponding to its angle

Some TVs or monitors are equipped with component video inputs. Connecting to

directions .......

repeatedly.

you stopped playback.

number instead of using the /

Output sound conversion table (sampling frequency/quantization bit)

+10

Notes on batteries

these inputs allows you to enjoy higher quality picture playback.

Normal:

Press PLAY.

Playing frame

Do not store dis

buttons.

Improper use of batteries may cause battery leakage and

Actual labels for component video inputs may vary depending on the TV

A-B RPT

Standard black level (7.5 IRE).

Playing in slow

The DVD video player starts random

or near heat sou

corrosion. To operate the remote control correctly, follow the

PLAY

manufacturer. (ex. Y, R-Y, B-Y or Y, C

2 3 0 : 0 8 : 1 6 9.6

Resuming play

playback.

Do not store dis

instructions below.

12.Use only with the cart, stand, tripod, bracket, or table specified by the

In some TVs or monitors, the color levels of the playback picture may be reduced

Recording system

Discs

Locating a Sp

Press the PLAY button within about

dust such as a b

Enhanced Black Level:

• Do not insert batteries into the remote control in the wrong

manufacturer, or sold with the apparatus. When a cart is used, use caution

slightly or the tint may change. In such a case, adjust the TV or monitor for

• During playback:

DVD

Locating a specific chapter or track

Track ...........

5 seconds after you press the

direction.

Store discs verti

Enhanced Black Level (0 IRE).

when moving the cart/apparatus combination to avoid injury from tip-over.

optimum performance.

Example

RANDOM button.

• Do not charge, heat, open, or short-circuit the batteries.

objects on discs

Locating a title

Do not throw batteries into a fire.

TITLE

warping.

Press A-B RPT again at the end of the

Notes

Locating a title

Movie 1:

DVD

Press SKIP

• Do not leave dead or exhausted batteries in the remote

segment (point B).

• DO NOT connect the BITSTREAM/PCM (DIGITAL) AUDIO OUT jack of the DVD video player to the AC-3 RF input of a Dolby

To raise brightness to clarify details.

DVD video

Locating a spec

control.

the chapter or track number you want.

Some discs may

Linear PCM

Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the

discs

The DVD video player automatically

• Do not use different types of batteries together, or mix old

Locating a spec

A-B RPT

numbers or elap

Playing chapter 3 of title 2

BITSTREAM/PCM (DIGITAL) AUDIO OUT jack of the DVD video player.

Playback starts from the selected chapter or track.

returns to point A and starts repeat

and new batteries.

Notes

Movie 2:

• Connect the BITSTREAM/PCM (DIGITAL) AUDIO OUT jack of the DVD video player to the "DIGITAL (COAXIAL)" input of a

playback of the selected segment

• If you do not use the remote control for a long period of

Notes

SKIP

To locate succeeding chapters or tracks

• Refer to the owner's manual of the connected equipment as well.

To turn off the

To deepen colors.

Receiver or Processor.

time, remove the batteries to avoid possible damage from

(A-B).

• Do not move the DVD video player during playback. Doing so may damage the disc.

• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment

DISPLAY agai

• Refer to the owner's manual of the connected equipment as well.

battery corrosion.

Linear PCM 44.1 kHz/16 bit

• Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may

from the wall outlet before making any connections.

• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment

Audio CDs

Playback starts from the beginning of

SKIP

• If the remote control does not function correctly or if the

• If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the

cause the DVD video player to malfunction.

Animation:

from the wall outlet before making any connections.

the current chapter or track.

operating range becomes reduced, replace all batteries

• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD video

DVD video player away from the tuner and radio.

To raise contrast enhancing colors.

• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate

When you press twice, playback starts

with new ones.

• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate

player to malfunction.

listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

from the beginning of the preceding

• If battery leakage occurs, wipe the battery liquid from the

• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen

listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

• Turn off the amplifier before you connect or disconnect the DVD video player's power cord. If you leave the amplifier power

battery compartment, then insert new batteries.

chapter or track.

• Turn off the amplifier before you connect or disconnect the DVD video player's power cord. If you leave the amplifier power

menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the

on, the speakers may be damaged.

STOP button on your remote control once the movie is completed.

on, the speakers may be damaged.

Downloaded From DvDPlayer-Manual.com Toshiba Manuals

To obtain a higher quality picture

Occasionally, some picture noise not usually visible during a normal broadcast

may appear on the TV screen while playing a DVD video disc because the high

. Otherwise, high volume sound may damage your hearing as well as the speakers.

38 40

resolution pictures on these discs include a lot of information. While the amount of

noise depends on the TV you use with this DVD video player, you should generally

reduce the sharpness adjustment on your TV when viewing DVD video discs.

About

DVD

The

DVD

described under that heading.

¡ B uenos d í a s!

Bonjour!

: You can use this function with DVD video discs.

DVD

Total playi

: You can use this function with audio CDs.

Playback sid

Title numbe

Amplifier equipped with an

VIDEO OUT

TITLE

VIDEO

MPEG2 audio decoder

To COAXIAL type

BITSTREAM

/PCM

digital audio input

DIGITAL

e.g.

AUDIO OUT

ANALOG

Chapter Repeat

Ð Ð

Chapter Random

ENG1 PCM 2CH

coaxial cable

(red)

(white)

ENG2

D 2CH

Repeats the current

To P

Plays chapters within

chapter.

VIDEO

the current title in

Multifuncti

OUT

random order.

Repeats the current

messages, e

e.g.

title.

Ð Ð

Plays titles in random

Repeats the current

order.

track.

Plays tracks in

Repeats the entire

random order.

disc.

(red)

(white)

while the angle

Resumes normal

Amplifier equipped with

or the

– on the batteries

a digital audio input

playback.

Resumes normal

playback.

To COAXIAL type

digital audio input

/ .

Audio system

coaxial cable

) outputs/inputs

+10

, C

)

A–

BITSTREAM/PCM

jack

Dolby Digital

Bitstream

48 kHz/16 bit

CHP

48 kHz/20 bit

48 kHz/16 bit

repeatedly to display

48 kHz/24 bit

48 kHz/16 bit

96 kHz/16 bit

48 kHz/16 bit

96 kHz/20 bit

48 kHz/16 bit

96 kHz/24 bit

48 kHz/16 bit

OFF

DTS

Bitstream

MPEG1, MPEG2

Bitstream

44.1 kHz/16 bit

DTS

Bitstream

A– B

Advan

Struct

Accessi 26

Pressing

control c

Entering

Normally

Playing

the titles

decoder system must be connected to the

divided i

Repeati

Operating with the remote control

icons on the heading bar show the playable discs for the function

FL DIM

Repeati

DVD vid

Playing

Point the remote control at the remote

Setting

* *

Chapter n

sensor and press the buttons.

Title 1

order ...

Playing

Chapter 1

Memor

Playing

: Title nu

order ...

To resume normal playback

About the screen saver

To turn off the angle number display

To turn off the picture enhancement selection

To resume normal playback

To locat

Zoomin

Press AUDIO or

Press PLAY.

Press CLEAR.

Press ENTER.

Press PLAY.

If you pause a picture of a DVD video disc and leave it

Press CLEAR.

setting is displayed on the TV screen.

: Chapte

still for a long while, the screen saver of the DVD video

PLAY

Zoomin

CLEAR

TOTAL

CHP

Audio C

PLAY

CLEAR

VIDEO OUT

To locat

VIDEO

Selectin

player automatically appears (when "Screen Saver" is

AUDIO

BITSTREAM

/PCM

set to "On"

(E.P.M.

Track number

DIGITAL

AUDIO OUT

ENTER

: To stop

ANALOG

PLAY button.

Within about 7 m (23 feet)

indicator

To select a title and chapter number at the same

To BITSTREAM/PCM

Selectin

Notes

Note

Track 1

(DIGITAL) AUDIO OUT

Selectin

time

• Some discs may not permit random playback operation.

The sound is muted during slow-motion playback.

Notes

Automatic Power Off function

: Playba

(E.A.M

• You cannot use the random playback function in conjunction

• You can change the camera angle during still playback. The

Perform step 1, and enter a title number you want in the

current

If the DVD video player is stopped, or the screen saver

ENTER

with the memory playback function.

camera angle changes to the new setting when you resume

space of "T (Title)" using the number buttons or the

is engaged for approximately 20 minutes, the DVD

Selectin

To resume normal playback

To P

To Y

: Fast re

normal playback.

buttons then perform steps 2 to 4.

Selectin

video player will automatically turn itself off.

Each title

VIDEO

Press CLEAR.

• If you pause a picture immediately after changing a camera

Note

is called

OUT

Distance: About 7 m (23 feet) from the front of the

angle, the resumed playback picture may not display the new

Actual effects to pictures may vary depending on the TV.

Note

Changin

CLEAR

: To star

Selectin

camera angle.

remote sensor

Make the selection to your preference.

Pressing the CLEAR button resets the title and chapter

Angle:

About 30 in each direction of the front of

numbers. To clear the "T (Title)" and "C (Chapter)" display,

To turn off the audio setting display, press the

Selectin

the remote sensor

press the T button several times.

CLEAR button.

: Fast fo

Selectin

Note

"title number", "chapter number" or "track

Some discs may not permit repeat operation.

* Do not expose the remote sensor of the DVD video

number" respectively.

Selectin

Operatin 36

To start playback from the beginning regardless

player to a strong light source such as direct

There may be discs that do not have these numbers.

: To loca

Notes

sunlight or other illumination. If you do so, you may

of the location where you stopped playback

• When you turn on the DVD video player or replace a disc,

Operatin

VIDEO OUT

not be able to operate the DVD video player via the

Functi

VIDEO

1 Press STOP twice.

player returns to the initial default setting

Notes on copyright

: To slow

remote control.

BITSTREAM

/PCM

If you select a sound track which is not included on the disc,

STOP

DIGITAL

AUDIO OUT

ANALOG

the DVD video player plays a prior sound track programmed

Custom

It is forbidden by law to copy, broadcast, show,

To BITSTREAM/PCM

on the disc.

: To pau

Notes on the remote control

(DIGITAL) AUDIO OUT

broadcast on cable, play in public, and rent copyrighted

• Some discs allow you to change audio selections only via

Setting

2 Press PLAY.

• Direct the remote control at the remote sensor of the DVD

material without permission.

the disc menu. If this is the case, press the MENU button

Setting

video player.

Others

To resume normal playback

PLAY

: To turn

and choose the appropriate language from the selections on

• Do not drop or give the remote control a shock.

DVD video discs are copy protected, and any

Press CLEAR.

the disc menu.

• Do not leave the remote control near an extremely hot or

recordings made from these discs will be distorted.

CLEAR

Table o

humid place.

The on-s

• Do not spill water or put anything wet on the remote

This product incorporates copyright protection

Before

control.

technology that is protected by method claims of certain

• If you want to return to the beginning of a DVD video

Specifi

Audio selection from the menu

• Do not open the remote control.

: Data tra

U.S. patents and other intellectual property rights

Notes

disc, open and close the disc tray once with the

"Bitstream"

= Amou

LIMITE

owned by Macrovision Corporation and other rights

• Some discs may not permit A-B repeat operation.

OPEN/CLOSE button before pressing the PLAY

ANALOG AUDIO

BITSTREAM/PCM

DVD vid

DVD

• During playback:

PLAYE

owners. Use of this copyright protection technology

• You cannot set the A-B repeat function for a segment that

OUT jacks

jack

button.

The larg

includes multiple camera angles

must be authorized by Macrovision Corporation, and is

Bitstream

48 kHz/20 bit

Example

but this d

48 kHz/16 bit

• You can specify a segment only within the current title.

48 kHz/16 bit

intended for home and other limited viewing uses only

quality.

Notes

48 kHz/20 bit

48 kHz/16 bit

• There may be a slight difference between point A and the

unless otherwise authorized by Macrovision

• The DVD video player's memory is also cleared when:

• Some titles may not display chapter numbers.

48 kHz/24 bit

48 kHz/16 bit

location where playback actually resumes depending on the

: CD-Tex

Corporation. Reverse engineering or disassembly is

– you change the parental lock setting

• If you press and hold the SKIP

48 kHz/16 bit

disc.

Displays

prohibited.

menu language

panel during playback, the DVD video player performs fast

48 kHz/20 bit

CDs. (So

– you open the disc tray.

reverse or fast forward playback. You can vary the speed by

48 kHz/24 bit

dependin

• There may be a difference in the location where playback

pressing the button repeatedly.

Bitstream

resumes depending on the disc.

To locate chapters or tracks during fast reverse or fast

48 kHz/16 bit

Bitstream

• Settings you changed using the on-screen displays while the

44.1 kHz/16 bit

forward playback, first press the PLAY button to resume

DVD video player keeps a location in the memory may

(Noise)

Bitstream

normal playback, then use the SKIP

function only after the memory is cleared.

• When you set "Title Stop" to "Off"

chapters in another title. If you go back to the preceding title

by pressing the SKIP

locates the first chapter of the title. When "Title Stop" is set

to "On," you can access chapters only within the current title.

PLAY

Dimm

Norma O

ENTER

1, 2

CLEAR

1, 2

CLEAR

REPEAT

DVD v

A-B RPT

Title

STOP

POWER

OPEN/CLOSE

PAUSE

SKIP

while the audio

• Use DVD video discs encoded via

the MPEG2 recording system.

The DVD video player starts repeat

Playback starts from the selected

AC IN

A - B

• Make the following setting.

chapter or track.

playback.

Alternatively leave the DVD video

Each time you press the AUDIO

Press the PLAY button within about

). To turn off the screen saver, press the

player unoperated for about 5

button, the audio settings included

On-screen display

5 seconds after you press the

seconds after having made the

on the DVD video disc change.

Random playback indicator

REPEAT button.

selection.

"Audio Out Select"

Recording system

Audio CD

If you press the

can select output sound format.

Angle

Repea

To Y video input

To P

video input

• Make the following setting.

The DVD video player's memory is

On-screen display

To P

video input

cleared.

"Audio Out Select"

TV or monitor with

component video inputs

Audi

Playback starts from the

DVD

beginning of the current title.

• Make the following setting.

Playback starts from the

On-screen display

beginning of the disc.

and output jacks on the rear panel

"Audio Out Select"

"Analog 2ch"

ANALOG AUDIO

BITSTREAM/PCM

OUT jacks

jack

48 kHz/20 bit

48 kHz/16 bit 48 kHz/20 bit

48 kHz/16 bit

TRK

48 kHz/20 bit

48 kHz/16 bit

48 kHz/24 bit

48 kHz/16 bit

S3125A

96 kHz/16 bit

48 kHz/16 bit

96 kHz/20 bit

48 kHz/16 bit

Playing track 6

96 kHz/24 bit

48 kHz/16 bit

48 kHz/16 bit 48 kHz/16 bit

44.1 kHz/16 bit

Bitstream

(Noise)

, you can access

: 3D (N-2-2) sound enhancement can function.

button, the DVD video player

PLAY

Select:

Page

"Bitstream"

To wall outlet

MPEG

buttons, you

Select:

Page

"PCM"

Select:

Page

"Analog 2ch"

"PCM"

ANALOG AUDIO

OUT jacks

48 kHz/16 bit

48 kHz/20 bit

48 kHz/24 bit

or select a disc

button on the front

48 kHz/16 bit

48 kHz/20 bit

48 kHz/24 bit

44.1 kHz/16 bit

(Noise)

button.

Table of Contents

This manual is also suitable for:

Sd-400v

Toshiba SD-K600 Owner's Manual page 21

Related Manuals for Toshiba SD-K600

Related Products for Toshiba SD-K600

This manual is also suitable for:

Table of Contents