Changing The Output Resolution - Pioneer DV-LX50 Operating Instructions Manual

Changing the output resolution

Use the OUTPUT RESOLUTION button located on the remote
control to switch the output resolution for the HDMI and component
video outputs.
Depending on the type of disc or file being played, the signals may
not be output with the resolution set at Resolution (Max) (page 33).
For details, see the table below.
480i/576i
DVD 480i/
576i
DVD-Audio 480i/
576i
DivX video/WMV 480i/
576i
JPEG 480i/
576i
Audio CD/ 480i/
Super Audio CD 576i
MP3/WMA/MPEG-4 480i/
AAC 576i
Video CD/Super VCD 480i/
576i
Note
• If analog video signals are output at a resolution of 1080i or 720p,
the GUI screen may look rough. This is not a malfunction.
Resetting the output resolution to the default setting
with HDMI connection
Use the OUTPUT RESOLUTION button on the remote control to
switch the player back to 576p/480p. You can also switch the player
to standby then, using the front panel controls, press  STANDBY/
ON while pressing   to switch the player back to 576p/480p.
Resolution (Max) setting
480p/ 1080i 720p 1080p
576p
480p/ 480p/ 480p/ 480p/
576p 576p 576p 576p
480p/ 480p/ 480p/ 480p/
576p 576p 576p 576p
480p/ 1080i 720p 480p/
576p 576p
480p/ 1080i 720p 480p/
576p 576p
480p/ 480p/ 480p/ 480p/
576p 576p 576p 576p
480p/ 1080i 720p 480p/
576p 576p
480p/ 480p/ 480p/ 480p/
576p 576p 576p 576p
02
15
En