Video Output Settings - Pioneer DV-610AV-K Operating Instructions Manual

Video Output settings

Setting
TV Screen
(This setting effective
for analog and HDMI
video output. See also
Screen sizes and disc
formats on page 51.)
Component Out
HDMI Resolution
HDMI Color
Option
4:3 (Letter Box)
4:3 (Pan & Scan)
16:9 (Wide)
16:9 (Compressed)
Progressive
Interlace
1920x1080p
1920x1080i
1280x720p
720x480p (NTSC)/
720x576p (PAL)
720x480i (NTSC)/
720x576i (PAL)
Full range RGB
RGB
Component
What it means
Set if you have a conventional 4:3 TV. Widescreen
movies are shown with black bars top and bottom.
Set if you have a conventional 4:3 TV. Widescreen
movies are shown with the sides cropped so that
the image fills the screen.
Set if you have a widescreen TV.
Can be selected when you are connected via
HDMI, and have the HDMI Resolution set to
1920x1080p, 1920x1080i or 1280x720p. Video in
4:3 can be properly displayed on a 16:9 high
definition television (with black bars shown on
either side of the screen).
Set if your TV is compatible with progressive scan
video (see your TV's instruction manual for details).
The PRGSVE indicator lights in the front panel
display. See also Switching the video output to
interlace using the front panel controls on page 12.
Note that progressive scan video is only output from
the component video jacks.
Set if your TV is not compatible with progressive
scan video.
Set if your TV supports 1920x1080 pixel
progressive-scan video (24 Hz frame rate is not
supported).
Set if your TV supports 1920x1080 pixel interlace
video.
Set if your TV supports 1280x720 pixel
progressive-scan video.
Set if your TV supports 720x480 pixel (NTSC)/
720x576 pixel (PAL) progressive-scan video.
Set if your TV supports 720x480 pixel (NTSC)/
720x576 pixel (PAL) interlace video.
If colors are weak, this gives brighter colors and
deeper black.
Use this setting if colors appear overly rich on the
Full range RGB setting.
Outputs component video format (default setting
for HDMI-compatible devices).
08
39
En