Adjusting Audio And Video Settings; Using The Setup Screen Menus - Pioneer DV-440 Operating Instructions Manual

Adjusting Audio
and Video
Settings
Using the Setup Screen
Menus
The procedure on this page describes how to operate the
menus on the Setup screen. These menus are used to
set and adjust a number of system settings. The various
functions that can be adjusted are covered throughout
this manual. The procedure on this page provides a basic
outline for using the Setup screen menus.
When setting up for the first time
It is recommended to set up player using the Setup
Navigator (page 17). If you selected [Auto Start Off]
when the Setup Navigator appeared, you may still set up
the player using the Setup Navigator in the General menu
screen.
If you choose not to use the Setup Navigator, be sure to
make the necessary settings in the Setup screen
Audio 1, Audio 2, Video 1, Video 2 and Language
menus as described on the following pages.
Some DVDs start playing automatically when loaded in
the player. If a DVD has been loaded, be sure to press
STOP 7 before proceeding.
1
2
3, 4, 5, 6
1
DV-533K
MIC VOLUME ECHO
STANDBY/ON
MIN–MAX MIN–MAX
24
En
OPEN/
LAST CONDITION CLOSE
MEMORY MEMORY
REPEAT
AUDIO SUB TITLE ANGLE
REPEAT
A-B
MENU TOP MENU
SETUP
RETURN
DISPLAY
¶
¶ 5 5
3
2
NEXT
PREV
¢
4
5
∞ ¶
¶
3
7 8
STOP PLAY PAUSE
¶
1 ¡
e E
REV FWD
STEP/SLOW
3
1 2 CLEAR
5 6 +10
4
¶
9 0
7 8
RANDOM PROGRAM SEARCH MODE
Î
DVD PLA YER
Î
7 8
4 1 ¡ ¢
0 3
1
Press ( STANDBY/ON on the front
panel).
2
Press SETUP.
The Setup screen appears.
Example
Audio1 A2 Video1
Audio DRC
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out
Setup audio
Digital output format/tone adjust
Move
3
Use the cursor buttons (2/3) to select the
menu you want.
As each menu is selected with the cursor, the
settings appear below the menu heading.
4
Use the cursor buttons (∞) to enter the
menu.
The top item within the menu becomes highlighted.
Example
Audio1 A2 Video1
Audio DRC
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out
Change Dolby Digital output mode
Move
5
Use the cursor buttons (5/∞) to select the
setting you want to change.
The options available for each setting appear to the
right when the setting is selected. The current
setting appears with the setting indicator lit.
6
Use the cursor buttons (3) to enter the
setting options.
Example
Audio1 A2 Video1
Audio DRC
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out
Output Dolby Digital
Move
• Not all menu options can be changed while a disc
is playing. In these cases, the options appear
grayed out on the screen and cannot be adjusted.
To change these settings, press STOP 7 first
before pressing SETUP.
• Operating the menu after pressing STOP 7 may
cancel the resume function.
• Some menu options are not immediately
effective if set while a disc is playing. To make
these settings effective, stop playback and then
start again, or change the settings while the disc
is stopped.
V2 Language General
Off
—
— Dolby Digital
— Off
96kHz 3 48kHz
—
MPEG 3 PCM
—
Exit
SETUP
V2 Language General
— Off
Dolby Digital
Dolby Digital 3 PCM
96kHz 3 48kHz
—
MPEG 3 PCM
—
Select SETUP Exit
ENTER
V2 Language General
— Off
Dolby Digital
Dolby Digital 3 PCM
96kHz 3 48kHz
—
MPEG 3 PCM
—
Exit
ENTER Select SETUP
continued