Siemens SIMATIC S7 Manual page 3

Safety Precautions and
Warnings
Qualified
Personnel
Use as prescribed
Trademarks
Copyright © Siemens AG 2008 All Rights Reserved
Passing on and reproducing this document as well as using and
disclosing its contents is prohibited unless an explicit permission is
given. Offenders will be liable for damages. All rights reserved,
especially in the case of patent grant or registration of a utility model
or design.
Siemens AG
Industry Sector
Engineering and Construction
I IS IN E&C
P.O. Box 3240, D- 91050 Erlangen
IT4.Industry@siemens.com
This manual contains warnings
the prevention of damage to property. These warnings are indicated by means of a warning
triangle and are displayed as follows in accordance with the level of danger:
__________________________________________________________________
Danger
indicates that loss of life, severe personal injury or substantial damage
will result if proper precautions are not taken.
__________________________________________________________________
__________________________________________________________________
Warning
indicates that loss of life, severe personal injury or substantial damage can result if proper
precautions are not taken.
__________________________________________________________________
__________________________________________________________________
Caution
indicates that minor personal injury or property damage can result if proper precautions are
not taken.
__________________________________________________________________
__________________________________________________________________
Note
represents an important information especially significant to the product, handling of the
product or a specific part of this documentation.
__________________________________________________________________
The start-up and the operation of the device may only be carried out by qualified
personnel. Qualified personnel in the sense of the security advices of this manual are any
persons authorized to commission, ground and label devices, systems and electric circuits.
Please note:
_________________________________________________________________________
Warning
This device may only be used for applications as prescribed in the catalogue and the
technical description. Furthermore, they may only be used in conjunction with third-party
devices and components recommended and authorized by Siemens.
A successful and safe operation of this product is depends on proper transport, and correct
storage, installation and assembly as well as careful operation and maintenance.
®
SIMATIC and SIMATIC NET
Since any other brand names in this manual may refer to trademarks, the use of these
names by third parties for their own purposes may infringe the rights of the owner.
, which you should note for your own safety as well as for
®
are registered trademarks of SIEMENS AG.
Exclusion of Liability
We have checked the contents of this document with regard to its
conformity with the described hardware and software. Deviations,
however, cannot be excluded. Therefore, we cannot guarantee its
complete conformity. The information in this document is checked
regularly and necessary corrections are contained in subsequent
versions. We will be grateful for any suggestions for improvement.
Technical data subject to change.