Mac Address-Table Aging-Time; Mac Address-Table Filtering - TP-Link T2500G-10TS Cli Reference Manual

20.2

mac address-table aging-time

Description
The mac address-table aging-time command is used to configure aging
time for the dynamic address. To return to the default configuration, please
use no mac address-table aging-time command.
Syntax
mac address-table aging-time
no mac address-table aging-time
Parameter
aging-time
be 0 or ranges from 10 to 630 seconds. When 0 is entered, the Auto Aging
function is disabled. It is 300 by default.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the aging time as 500 seconds:
T2500G-10TS(config)# mac address-table aging-time 500
20.3

mac address-table filtering

Description
The mac address-table filtering command is used to add the filtering
address entry. To delete the corresponding entry, please use no mac
address-table filtering command. The filtering address function is to forbid
the undesired package to be forwarded. The filtering address can be added
or removed manually, independent of the aging time.
Syntax
mac address-table filtering
no mac address-table filtering {[
Parameter
mac-addr
—— The aging time for the dynamic address. The value of it can
mac-addr
—— The MAC address to be filtered.
146
aging-time
vid
vid
mac-addr vid
] [ vid ]}