Error Messages - Pioneer HTD88DVD Operating Instructions Manual

Additional information
Problem
Sound is mono only.
Considerable noise in
radio broadcasts.

Error Messages

Message
Child Lock
Rec Mode On
Phones In
96k Stereo
No Surr. SP
Muting
Exit
SR+ Error
Remedy
• Check that the tuner is not set to FM mono (see Improving poor FM
reception on page 35).
• Tune into the correct frequency.
• Connect the antenna (see Connecting the supplied antennas on page 18
and Connecting external antennas on page 71).
• Fully extend the FM wire antenna, position for best reception, and
secure to a wall.
• Connect an outdoor FM antenna (see Connecting external antennas on
page 71).
• Adjust the direction and position for best reception.
• Connect an additional internal or external AM antenna (see AM loop
antenna on page 18 and Connecting external antennas on page 71).
• Turn off any other equipment that may be causing the noise or move it
away from the system unit.
• The tuning interval is incorrect for your country or region. Try switching
the tuning interval (frequency step) (see TV attenuator setting on page 67).
Description
• This message appears when the front panel buttons are pressed when
the child lock feature is active. See Child lock setting on page 67 for more
on switching on/off the child lock.
• Blinks rapidly for 2 seconds when an operation is prohibited because
the Recording Mode is on (see Recording mode on page 72).
• Blinks rapidly for 2 seconds when an operation is prohibited because
headphones are connected.
• Blinks rapidly for 2 seconds when an operation is prohibited because
the source is digital 88.2 kHz or 96 kHz PCM.
• Blinks rapidly for 2 seconds when an operation is prohibited because
there is no surround speaker output.
• Blinks rapidly for 2 seconds when an operation is prohibited because
the sound is muted (press the MUTE button to turn the sound on).
• Appears briefly when a menu is automatically exited after a set period of
inactivity.
• Appears when there is a communication problem between the unit and
the plasma display. Check all connections and retry.
12
77
En