Pioneer HTD88DVD Operating Instructions Manual page 4

If the AC plug of this unit does not match the AC
outlet you want to use, the plug must be removed
and appropriate one fitted. Replacement and
mounting of an AC plug on the power supply cord of
this unit should be performed only by qualified
service personnel. If connected to an AC outlet, the
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
The equipment should be disconnected by removing
the mains plug from the wall socket when left
unused for a long period of time (for example, when
on vacation).
Energy-saving design
This system is designed to use 0.5 W of
electricity when power is switched to
standby.
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
For U.S. and Australia Model
D3-4-2-2-1a_A_En
C67-7-3_En
Voltage selector
[Excluding Taiwan model]
You can find the voltage selector switch on the rear
panel of multi-voltage models.
The factory setting for the voltage selector is 220–
230 V. Please set it to the correct voltage for your
country or region.
• Saudi Arabia operates on 127 V and 220 V mains
voltage. Please set to the correct voltage before using.
For Australian and New Zealand models:
The factory setting for the voltage selector is 240 V.
Please set it to the correct voltage for your country
or region.
Before changing the voltage, disconnect the AC power
cord. Use a medium size screwdriver to change the
voltage selector switch.
VOLTAGE
120-
SELECTOR
127V
220-
230V
240V
VOLTAGE
120-
SELECTOR
127V
220-
230V
240V
For Australian and
New Zealand models only
D3-4-2-1-5_En