Configuration; Control Unit - Bosch CCS 1000 D Operation Manual

Digital Discussion System
7

Configuration

To configure the CCS 1000 Digital Discussion System you can use:
–
–
The Control Unit can be used to quickly view and change basic settings. The advantages of
using the web browser to configure the system are:
–
–
Notice!
Changes made on the Control Unit are automatically updated in the web browser and
vice‑versa.
7.1

Control Unit

1.
2.
1 2
Figure 7.1: Front view of CCSD-CURD Control Unit
The CCSD-CURD Control Unit has additional features as indicated in the following table:
Number Item
1 Power on/off button
2 Power on/off LED
3 Buttons and LED indicators
for volume control of
Discussion Devices
Bosch Security Systems B.V.
The touch buttons on the front of the Control Unit, or
the web browser.
– For more information, see Web browser, page 29.
Additional options and settings are available.
Settings can be easily managed.
After pressing the Power on/off button (1) on the Control Unit, the power on/off LED
turns green, and the other LEDs are alternatively lit to indicate that the system is starting
up. The system is ready for use when all LEDs are constantly lit.
Press the touch buttons on the front panel of the Control Unit to set basic system
settings. The LED indicators will change to indicate the setting. Refer to the following
figure and table for more information on the Control Unit settings:
3
4
Description
On/off touch button for 24 VDC. Short pressing is power on, long
pressing is power off.
LED indicator for showing the on/off status of the Control Unit:
– Red: Power off.
– Green:Power on.
Plus/minus buttons for setting the volume of all Discussion Devices and
output 1. Used in combination with four LED indicators for showing the
selected volume.
5 6
7 8
Operation manual
Configuration | en
9 11
10 12 13 14
23
2014.09 | V1.0 |