Configuring Smart Plan Settings - Honeywell HDZ302D User Manual

74 | equIP® Series 30x Zoom WDR PTZ Camera User Guide
9.
10. To send an email notification when an audio event is detected, select the Send Email
11. To initiate a predefined preset, tour, or pattern when an audio event is detected, select the
12. To take a snapshot when an audio event is detected, select the Snapshot check box.
13. Click Save to apply the settings.

Configuring Smart Plan Settings

You can add auto tracking or face detection to a configured preset on the Setup > IVS
Analysis > Smart Plan page. You must already have configured presets in Setup > PTZ >
Function> Preset. See
To add a smart plan to a preset:
1.
2.
3.
www.honeywell.com/security
In the Alarm Delay field, enter the number of seconds that the system will continue to
generate an alarm output after an audio event has ended. Enter a value between 10 and
300.
check box. Email settings must be configured in Setup > Network Setup > SMTP
(Email). See Configuring Email Settings
PTZ check box and select the desired action from the Activation list.
Note For the snapshot to be attached to the email notification, the Attachment check
box must be selected in Setup > Network Setup > SMTP (Email).
See Configuring Email Settings
Configuring Presets
Set Extensional smart function to OFF.
Click Add Plan and then select a preset from the list.
Click the icon for auto tracking or face detection to add the function to the preset.
Note You must click the currently selected icon to deselect it before making a new
selection.
on page 59.
on page 59.
on page 26.