Basic Operations; Selecting A Source; Adjusting The Volume; Turning The Unit Off - Pioneer DEH-3900MP Operation Manual

Cd rds receiver
Hide thumbs Also See for DEH-3900MP:
Table of Contents

Advertisement

MAN-DEH-3900MP-GB.fm Page 9 Monday, January 15, 2007 3:45 PM
Operating this unit

Basic Operations

Turning the unit on and selecting a source
You can select a source you want to listen to. To switch to the built-in CD player, load
a disc in the unit (refer to page 12).
* Press SOURCE to select a source.
Press SOURCE repeatedly to switch between the following sources:
Tuner – Built-in CD player – AUX
Notes
• In the following cases, the sound source will not change:
– When there is no disc in the unit.
– When the AUX (auxiliary input) is set to off (refer to page 15).
• AUX is set to on by default. Turn off the AUX when not in use (refer to "Switching the auxiliary
setting" on page 15).
• When this unit's blue/white lead is connected to the vehicle's auto-antenna relay control
terminal, the vehicle's antenna extends when this unit's source is turned on. To retract the
antenna, turn the source off.

Adjusting the volume

* Use VOLUME to adjust the sound level.

Turning the unit off

* Press SOURCE and hold until the unit turns off.

Tuner

Listening to the radio

1. Press SOURCE to select the tuner.
2. Press BAND to select a band.
Press BAND until the desired band (F1, F2 for FM or MW/LW) is displayed.
3. To perform manual tuning, briefly press 4 or 6.
4. To perform seek tuning, press and hold 4 or 6 for about one second and
release.
The tuner will scan the frequencies until a broadcast strong enough for good reception
is found.
• You can cancel seek tuning by briefly pressing 4 or 6.
• If you press and hold 4 or 6 you can skip stations. Seek tuning starts as soon as
you release the button.
Storing and recalling broadcast frequencies
* When you find a frequency that you want to store in memory, press one of preset
tuning buttons 1 to 6 and hold until the preset number stops flashing.
Memorized radio station frequency can be recalled by pressing the preset tuning
button.
• Up to 12 FM stations, 6 for each of the two FM bands, and 6 MW/LW stations can
be stored in memory.
• Press 8 or 2 to recall radio station frequencies.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents