Env - Roland JU-06 User Manual

ENV

This generates the Control Voltage applied to the VCF and the VCA, thereby controlling the volume and the tone
color of each note. This output voltage is generated whenever you press a key.
1. A (Attack Time)
This sets the time required for the voltage to reach its maximum from the moment the key is pressed down.
2. D (Decay Time)
This determines the time required for the voltage to drop from the maximum to the sustain level. When the sustain
level is high, the Envelope curve does not change by adjusting the Decay Time.
3. S (Sustain Level)
This knob determines the Sustain Level to which the voltage falls at the end of the Decay Time.
4. R (Release Time)
This sets the time needed for the voltage to reach zero.
18