Operating With The Head Unit - Pioneer XDV-P90 Owner's Manual

Operating with the Head Unit

When in the IP-BUS mode, some operations can be performed with the head unit.
When connected to a Pioneer Multi-Channel AV Master Unit (e.g. AVM-P9000R), refer to
the AV Master Unit Owner's Manual.
When connected to the "DEX-P9", refer to the Head Unit's Manual.
When operating with another head unit, refer to the following Function Compatibility Chart
and Function Mode Switching, and operate with the appropriate buttons.
7 Function Compatibility Chart
Function
Source switching
Disc switching (selection by disc number)
Disc switching
(moving ahead one disc number at a time)
Disc switching
(moving ahead or back one disc number at a time)
Chapter/track advance/return
Fast forward/reverse
*1 Operation is possible when the AUTO (A/M) mode is set to AUTO.
*2 Operation is possible when the AUTO (A/M) mode is set to MANU.
7 Function Mode Switching
When using convenient functions other than those usually used, switch the mode and operate.
Press the FUNCTION button.
1
Press the button repeatedly until the desired mode is selected.
FUNC1 = FUNC2 = FUNC3 = FUNC4 = AUTO (A/M)
Press the 5 button (press the ∞ button to switch OFF).
2
Perform AUTO (A/M) operation with the 2/3 button.
Mode
FUNC1
FUNC2
FUNC3
FUNC4
Mode
AUTO (A/M)
53
Press the 5 button
Head unit display switching
Pause (see page 24)
Scan play (see page 38)
Repeat range switching
(See pages 32, 35 and 37)
Press the 2/3 button
AUTO/MANUAL switching
Reference page Button
17 SOURCE, SOURCE/OFF
—— 1 – 6
BAND, 23
23
5/∞
23
2/3*
20
2/3*
22
Press the 5 button for 2 seconds
———
Random play (see page 38)
———
———
Press the 2/3 button for 2 seconds
———
1
2